Important safety instructions Important safety instructions Alter Ego Delay – Manual (2014-05-26)
Page 4
– Consult the dealer or an experienced ra- caution when moving the cart/apparatus dio / TV technician for help. combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. Alter Ego Delay – Manual (2014-05-26)
The exclamation point triangle is used to alert the user to presence of important operating and service instructions in the literature accompany- ing the product. Alter Ego Delay – Manual (2014-05-26)
For ex- ample, clicking the logo in the upper left corner of each page will take you back to the table of contents. To download the most current version of this manual, visit tcelectronic.com/support/manuals/ Alter Ego Delay – Manual (2014-05-26)
We are proud to present the result of the joint collaboration between TC Electronic and Pro- GuitarShop. Alter Ego Delay is a new take on the very successful TC Electronic Flashback, fea- turing two new presets modeled after a couple classic delays: the Binson Echorec, and the EHX Deluxe Memory Man.”...
You will also be delighted to hear (literally) that this TC Electronic effect pedal will let your dry, unprocessed sound pass without ever convert- ing it to digital – keeping your original tone pure and without any latency.
And how about doing this yourself? free software for popular smartphones that al- When you look at your TC Electronic effect ped- lows you to “beam” new TonePrints right into al, you’ll only see a few knobs. Actually, for some This is exactly what TonePrint allows you to do.
If you open the manual for TonePrint Editor in Last but not least… Adobe Reader, you can click on interface sec- tions to jump directly to the sections of the man- free! – TonePrint Editor is absolutely ual you are interested in. Alter Ego Delay – Manual (2014-05-26)
Setup Ready… Set… Play! Your TC Electronic effect pedal box should con- – Connect a 9 V power supply with the follow- tain the following items: ing symbol to the DC input socket of your TC Electronic effect pedal. – Your TC Electronic effect pedal –...
(centre = negative). – Hold down the footswitch. – With the footswitch held down, play steady Your TC Electronic effect pedal requires a 9 V short 1/4 notes on your instrument. power supply providing 100 mA or more (not Please note that the output is always muted supplied).
Use the standard Mini-B USB port on your TC Please note that the knob assignments on your Audio inputs (stereo) TC Electronic effect pedal are the default as- Electronic effect pedal to connect your pedal to The audio inputs on the right side of this pedal a computer.
This is what we modeled the ER setting of This is as close as you can get to the charming Alter Ego Delay after. You will notice this warble Oh, and while you’re at it, try playing around with nature of an old analog transistor bucket-brigade the SUBDIVISION SELECTOR Switch.
Using the looper is explained in “Using the loop- Like the ball in the eponymous game, the delay er”. With the looper built into your Alter Ego Delay, repeats jump from left to right (provided you’re you can record and play back grooves and lines using both outputs for a stereo signal).
TC pedal has more than one LED, the leftmost LED should turn green. This indicates that the pedal is ready to receive the software update. – Release the footswitch. – Your TC pedal will now be recognized as an updatable device. Alter Ego Delay – Manual (2014-05-26)
– you use a long cable between your guitar and removed from the pedal’s output. Use this mode the first pedal or when you place your TC Electronic effect pedal – if you use many pedals on your board or in a parallel effects loop.
But for 99 % of all amps, the TonePrint pedals will work just fine. For additional information about your TC Elec- tronic TonePrint effect pedal, please go to TC Electronic Support: tcelectronic.com/support/ Alter Ego Delay – Manual (2014-05-26)
Technical specifications Technical specifications Alter Ego Delay – Manual (2014-05-26)
Page 29
Standard 9 V DC, centre negative >100 mA (power supply not included) Battery option Standard 9 V (battery not included) Input impedance 1 MΩ Output impedance 100 Ω USB port Mini USB connector for uploading and editing custom TonePrints and for software updates Alter Ego Delay – Manual (2014-05-26)
Page 30
Technical specifications Alter Ego Delay – Manual (2014-05-26)
Need help?
Do you have a question about the Alter Ego Delay and is the answer not in the manual?
Questions and answers