TC Electronic M2000 User Manual page 28

THE PROGRAMS... continued
EQ Programs
The EQ programs are all 3 band parametric types with sepa-
rate high and low shelving bands.
USER PARAMETERS
Frequency
Low shelving filter ranges from 20hz to 5Khz
High shelving filter ranges from 500hz to 20Khz
Three band filters ranges from 20hz to 20Khz
Band width
Low and high shelving filters have 2 different bandwidths
The 3 bandfilters have 3 different bandwidths
Level
All filters range +/- 12dB.
EQ level
Adjustable +/-12dB.
28
Tremolo Programs
The Tremolo programs are effects where the output level is
modulated by an LFO. Our programs are able of setting the
LFO phase between the two outputs.
USER PARAMETERS
Speed
Controls the rate of sweep in a range from 1 sweep every 10
seconds to 10 sweeps every second.
Depth [intensity]
Determines how wide a modulation (sweep) is produced.
Phase
Determines the sine wave modulation phase shift between
left and right channels. At 0º the left and right modulation
will move in sync. At 180º the modulation will move the
channels against each other.
Mix
Mix between direct and effect.
Out Level
Adjust output level. Use this parameter to match levels
between presets.