TC Electronic M2000 User Manual page 17

STUDIO SETUP EXAMPLES
Use two sends on your mixing console
Dual Input mode
Let's say Engine1 is running a long Hall-type reverb and Engine 2 a short more ambient type
of reverb. On Your mixing console you'll now have individual sends for the two effects.
And - not to forget - you are saving a set of return channels.
Create your own vocal reverb
Serial mode
You probably always wanted to have a long bright reverb on your lead vocal, without
»esses« hanging for seconds. That's now possible. You simply connect a »de'esser« and your
favorite reverb in serial. The de'esser will cut away all sharp transients in the signal.
If you want your vocal to have a unique »livingness«, or the reverberated signal to be slightly
detuned, simply connect the pitch shifter or chorus in series with the reverb.
There are numerous applications in this mode - try them out.
Two individual inserts on your mixer
Dual mono mode
In the dual mono mode you are able to use two completely separate mono effects at the same
time. It can be equalizers or compressors or whatever you can imagine.
Post Production
Stereo mode
When running in stereo mode both engines are linked in stereo and both channels audio path
are totally separated. This means that you can process Dolby Surround™ materials without
destroying the hidden information. Use this mode when adding reverb to your recording.
17