Store; Using A Memory Card - TC Electronic M2000 User Manual

STORE

Store a new RAM Preset
- Press the STORE button [Engine 1, 2 or combined]
- Select a location for your new preset [dial between preset 1 to 128]
- Move cursor to the new name line and dial in the new preset name [find letter with ADJUST and confirm with OK ]
- Point on DONE and press OK to finalize store operation.
Store with the same name:
If you want to Store the Preset with the existing name simply select the RAM location to Store in by using the ADJUST wheel and press
OK (the OK key will be blinking while you search for a suitable RAM space). The M2000 will now tell you "STORED" in a pop-up win-
dow and return to the homepage.
CAPS LOCK
Indicator
The letterbox
When you want to change the name of the preset to Store, press
the Cursor Down key. You are now able to write a new name
using the letterbox. Simply dial the ADJUST wheel and press OK
to select new letters.
Select CAP, by pressing OK, to change case.
When you have changed the name select DONE in the Letterbox
and press OK to Store.
Combined Store
The handling of Combined Store is exactly the same as a normal
Store.
Please note that a Combined Preset Stores the Routing of the
Engines along with the Preset.
12
Cursor arrows

Using a Memory Card:

When you wish to use a Memory card, simply insert the Card in
the M2000. The M2000 will now autodetect your card and the
Store, Recall and Snapshot facilities will be attached to the
Memory card. The M2000 will now use the Memory Card as a
normal RAM bank. When you remove your Memory card the
M2000 will switch back to the internal RAM.
If the format of the Memory card is not correct, the M2000 will
detect this immediately.
Card types
Type 1 PC-CARDS, with minimum 64KBytes SRAM.
Store location
New preset name
Letterbox
Place cursor here and press OK
to finalize store operation