Undoing A Loop Recording; Deleting A Loop Completely; Loops Cannot Be Stored - TC Electronic FLASHBACK X4 User Manual

Undoing a loop recording

During loop recording, each new recording is added on top of the
loop's previous version. However, if you make a mistake during
a recording cycle, you can undo it by pressing the
footswitch.
If you change your mind, you can press the
switch again to bring back the previously deleted recording cycle.
The undo/redo feature is not only useful for fixing mistakes – it can
also be used as a creative tool on stage. Here is a simple example:
– Record a bass line (loop cycle 1)
– Record some chords (loop cycle 2)
– Record a melody (loop cycle 3)
– Tap the footswitch to remove the melody. Sing
UNDO/REDO
or improvise.
– Tap the footswitch again to bring back the previ-
UNDO/REDO
ously recorded melody.

Deleting a loop completely

To delete your loop recording (not only the last recording cycle)
completely, press and hold the
UNDO/REDO

Loops cannot be stored

Please note that while you can store the delay module's settings as
presets, you cannot store loops. When you switch off the Flashback
X4 Delay & Looper, the current loop is erased.
UNDO/REDO
foot-
UNDO/REDO
footswitch.
The Looper module continued
26