Table of Contents
Advertisement
LOOP
With Flashback's loop function you can record and playback grooves and lines for playing along. You
can even overdub your recording an unlimited number of times.
The duration of a loop can be up to 40 seconds in mono and 20 seconds in stereo regardless of how
many overdubs you make.
How does it work?
1
Select LOOP.
2
Make sure the pedal is in bypass mode (LED off). Feel the groove and prepare for recording. Then
press the switch to start your recording and play. The LED flashes red.
3
Press the switch again to stop recording. Flashback immediately starts playing the loop. In this
play mode the LED is green.
4
To overdub your recording press the switch once more. The LED now blinks.
5
To delete all recordings, double-click the switch.
Please note the following
-
The first round of recording always sets the length of the loop (1). If an overdub exceeds the length
of the loop (2), a third round of recording begins (3). This gives a very natural, logic and musical
feel when recording loops.
13
Hide quick links:
Advertisement
Table of Contents
