Playback Using The Vari-Pitch Function - Fostex D2424LV Quick Operation Manual

Model D2424LV Quick Operation Guide

Playback using the Vari-pitch function

This section explains how to change the playback speed of the recorder using the Vari Pitch function.
You can set the playback speed in the range of +6.0% to -6.0% in 0.1% increments.
The [VARI PITCH] key turns Vari Pitch mode on and off. When the function is turned on, the VARI PITCH
LED lights up. When the function is turned off, the LED turns off.
Initialize the recorder.
POWER
1. Press the [PLAY] button to play this recorder.
2. Press the [VARI PITCH] key.
The VARI PITCH key LED lights up on the display, indicating
that the Vari Pitch function is turned on.
3. Press the [RECALL] key, then press the [VARI PITCH]
key.
The current pitch data flashes on the display, indicating
that you can change the pitch data now. (The "%" mark
flashes.)
OL
0
3
6
9
12
18
24
30
42
1 2 3 4 5 6 7 8 9 10 11 12
4. Set the desired pitch data using the Jog dial.
Rotating the Jog dial enables you to hear changes in
playback speed. Rotating the Jog dial clockwise increases
the speed, and rotating it counter-clockwise decreases the
speed.
To continue the playback with the Vari Pitch function
on, press the [EXIT/NO] key. This recorder exits Vari Pitch
data edit mode, indicates the previous Time Base display,
and continues playing with the Vari Pitch you just set.
5. To turn off Vari Pitch mode, press the [VARI PITCH]
key.
The VARI PITCH LED turns off, the Vari Pitch function is
cancelled, and this recorder resumes playback at normal
speed.
Vari-pitch function procedures
24TRACK DIGITAL RECORDER
RECORD TRACK
1/9/17
2/10/18 3/11/19 4/12/20 5/13/21
FOOT SW
ENVELOPE
ACCESS 9-16
OL
BIT
0
3
6
9
12
18
24
30
42
13 14 15 16 17 18 19 20 21 22 23 24
3
AUTO RTN
CLIPBOARD
AUTO PLAY START
IN OUT
EDIT SETUP
SHIFT
TC READY TC GEN
AUTO
REHEARSAL
24bit
PUNCH
96kHz
TAKE
OPTICAL
PLAY
RECORD STOP
TRACK SHIFT
6/14/22 7/15/23 8/16/24
ALL INPUT ALL READY
17-24 TRACK SHIFT CLIPBOARD PLAY
LOCATE ABS 0
LOCATE REC END
1
6. If you wish to play back data at the current Vari Pitch
again, press the [VARI PITCH] key to turn the LED on.
You can turn the Vari Pitch function on and off and edit
the pitch data while this recorder is playing or stopped,
but not during recording.
However, if the Vari Pitch function has already been turned
on and the pitch data was specified before you started
recording, this recorder will record using the current Vari
Pitch.
<Notes>
• Even if the pitch data is 0.0% (no speed change),
pressing the [VARI PITCH] key will still turn on the
24 VARI PITCH function.
FS
kHz
The speed is not changed, but the Vari Pitch is
CLOCK
INT
turned on.
• The Vari Pitch function is automatically turned
off under the following conditions:
1. You have turned off and on the power to this recorder.
The pitch data will be reset to 0.0%.
2. You must press the [EXECUTE/YES] key while
holding down the [SHIFT] key to turn the "SLAVE
mode" on (the setting pitch data remains).
3. You set "Digital In" of the SETUP mode to a "Sync"
mode ("SPDIF: Sync" or "adat: Sync") and the
recorder is locking to the external clock from DIGITAL
IN or WORD IN. In consequence, "DIGITAL" and "EXT"
indicators light in the display.
24
2,3,5,6
AUTO RTN
AUTO PUNCH
PGM SEL EXIT/NO EXECUTE/YES
IN OUT END
PREVIEW EJECT CHASE
CHARACTER
LOCATE MEMORY
STORE
UNDO/REDO PREV NEXT DISP SEL RECALL
PREV TC NEXT TC TIME BASE SEL HOLD
M.UNDO
LOCATE VARI PITCH
P.EDIT
REW F FWD
4