Table of Contents
Advertisement
Playback using the Vari-pitch function
This section explains how to change the playback speed of the recorder using the Vari Pitch function.
You can set the playback speed in the range of +6.0% to -6.0% in 0.1% increments.
The [VARI PITCH] key turns Vari Pitch mode on and off. When the function is turned on, the VARI PITCH LED
lights up. When the function is turned off, the LED turns off.
Initialize the recorder.
POWER
1.
Press the [PLAY] button to play this recorder.
2.
Press the [VARI PITCH] key.
The VARI PITCH key LED lights up on the display,
indicating that the Vari Pitch function is turned on.
3.
Press the [SHIFT] key, then press the [VARI PITCH]
key.
The current pitch data flashes on the display,
indicating that you can change the pitch data now.
(The "%" mark flashes.)
OL
0
3
6
9
12
18
24
30
42
1
2
3
4
5
6
7
8
9
10
4.
Set the desired pitch data using the Jog dial.
Rotating the Jog dial enables you to hear changes in
playback speed. Rotating the Jog dial clockwise
increases the speed, and rotating it counter-clockwise
decreases the speed.
To continue the playback with the Vari Pitch
function on, press the [EXIT/NO] key. This recorder
exits Vari Pitch data edit mode, indicates the
previous Time Base display, and continues playing
with the Vari Pitch you just set.
5.
To turn off Vari Pitch mode, press the [VARI PITCH]
key.
The VARI PITCH LED turns off, the Vari Pitch function
is cancelled, and this recorder resumes playback at
normal speed.
Vari-pitch function procedures
24TRACK DIGITAL RECORDER
RECORD TRACK
1/9/17
2/10/18
3/11/19
4/12/20
5/13/21
6/14/22
FOOT SW
ENVELOPE
ACCESS
9-16
Flashing
OL
BIT
24
0
3
6
9
12
CLOCK
18
24
INT
30
42
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Model D2424LVmkII Quick Operation Guide
3
AUTO RTN
CLIPBOARD
AUTO PLAY
START
IN
OUT
EDIT
SETUP
SHIFT
TC READY
TC GEN
AUTO
REHEARSAL
24bit
PUNCH
96kHz
TAKE
OPTICAL
PLAY
RECORD
STOP
TRACK SHIFT
7/15/23
8/16/24
ALL INPUT
ALL READY
17-24
TRACK SHIFT
CLIPBOARD PLAY
LOCATE ABS 0
LOCATE REC END
1
6.
If you wish to play back data at the current Vari Pitch
again, press the [VARI PITCH] key to turn the LED on.
You can turn the Vari Pitch function on and off and
edit the pitch data while this recorder is playing or
stopped, but not during recording.
However, if the Vari Pitch function has already been
turned on and the pitch data was specified before
you started recording, this recorder will record using
the current Vari Pitch.
<Notes>
• Even if the pitch data is 0.0% (no speed
change), pressing the [VARI PITCH] key will
still turn on the VARI PITCH function.
The speed is not changed, but the Vari Pitch
FS
is turned on.
kHz
• The Vari Pitch function is automatically
turned off under the following conditions:
1. You have turned off and on the power to this
2. You must press the [EXECUTE/YES] key while
3. You set "Digital In" of the SETUP mode to a
24
2,3,5,6
AUTO RTN
AUTO PUNCH
PGM SEL
EXIT/NO
EXECUTE/YES
IN
OUT
END
PREVIEW
EJECT
CHASE
CHARACTER
LOCATE MEMORY
STORE
UNDO/REDO
PREV
NEXT
DISP SEL
RECALL
PREV TC
NEXT TC
TIME BASE SEL
HOLD
M.UNDO
LOCATE
VARI PITCH
P.EDIT
REW
F FWD
recorder.
The pitch data will be reset to 0.0%.
holding down the [SHIFT] key to turn the
"SLAVE mode" on (the setting pitch data
remains).
"Sync" mode ("SPDIF: Sync" or "adat: Sync")
and the recorder is locking to the external clock
from DIGITAL IN or WORD IN. In consequence,
"DIGITAL" and "EXT" indicators light in the
display.
4
Advertisement
Table of Contents
