Supermicro Supero X6DAL-B2 User Manual page 57

Chapter 4: AMI BIOS
Hyper-Threading
This setting allows you to Enable or Disable the function of hyper-
threading. Enabling hyper-threading results in increased CPU
performance.
Intel(R) SpeedStep(tm) tech.
This setting allows the system to set the CPU speed. Select Maximum to
set the CPU to operate only at its maximum speed. Select Minimum to set
the CPU to only operate at its minimum speed. Select Automatic to allow
the cpu speed to be controlled by the operating system. Select Disabled
to allow the CPU to operate only at its default speed.
CPU Force PR#
If Enabled, the FORCEP# will function as an input pin. If disabled, the state
of FORCEPR# will be ignored by the CPU. The options are: Enabled and
Disabled.
Select TM2 VID
This setting allows you to set the TM2 VID value. Enter a number from
14 to 35 to select the desired voltage value (from 1.000V to 1.2625V.)
The default setting is 30(=1.2000).
4-5