Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Supero Supero SC512 Series
Summary of Contents for Supero Supero SC512 Series
- Page 1 UPER ® SC512 Chassis Series SC512-260B SC512F-600B SC512-200B SC512F-520(B) SC512F-260(B) SC512F-410(B) SC512L-260(B) SC512F-600LB SC512F-520L(B) SC512L-200B SC512L-260(B)-LCD SC512F-350B SC512C-260(B) SC512F-280(B) SC512C-200(B) USER’S MANUAL 1.0c...
- Page 2 This product, including software and documentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license.
- Page 3 SC512 1U chassis. Installa- tion and maintenance should be performed by experienced technicians only. Supermicro’s SC512 1U chassis features a unique and highly-optimized design for dual-core Xeon platforms. The chassis is equipped with a 200, 260, 280. 350, 410, 520 or 600 Watt high-efficiency power supply for superb power savings.
-
Page 4: Manual Organization
SC512 Chassis Manual Manual Organization Chapter 1: Introduction The first chapter provides a checklist of the main components included with this chassis and describes the main features. This chapter also includes contact infor- mation. Chapter 2: System Safety This chapter lists warnings, precautions, and system safety. You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed before installing and servicing this chassis. -
Page 5: Table Of Contents
Chassis Features .................... 1-2 CPU ......................... 1-2 I/O Expansion slots ..................1-2 Peripheral Drives ..................... 1-2 Dual Hard Drives ..................... 1-2 Contacting Supermicro ..................1-3 Returning Merchandise for Service..............1-4 Chapter 2 System Safety Overview ......................2-1 Warnings and Precautions ................2-1 Preparing for Setup .................. - Page 6 SC512 Chassis Manual Chapter 4 System Interface Overview ......................4-1 Control Panel Buttons ..................4-2 Control Panel LEDs ..................4-2 Chapter 5 Chassis Setup and Maintenance Overview ......................5-1 Installation Procedures ..................5-1 General Maintenance ..................5-1 Removing the Chassis Cover ................. 5-2 Installing Hard Drives ..................
- Page 7 Preface Identifying the Sections of the Rack Rails (Optional Item) ......6-4 Installing the Inner Rail Extension ..............6-5 Installing the Outer Rails to the Rack ............. 6-6 Installing the Chassis into a Rack..............6-8 Mid-Mount Telco Rack..................6-9 Installing the Chassis into a Rack in Mid-Mount Position ......6-9 Appendix A Cables, Screws, and Other Accessories Appendix B Power Supply Specifications...
- Page 8 SC512 Chassis Manual Notes viii...
-
Page 9: Chapter 1 Introduction
The chassis is equipped with a high-efficiency power supply in a small form factor for optimized space efficiency. The following chart lists model numbers and features currently available at the time of printing. For additional information visit the Supermicro Web site at www. supermicro.com SC512 Chassis... -
Page 10: Chassis Features
These drives allow data to be installed or saved quickly. Dual Hard Drives Some SC512 chassis models support a second hard disk drive. For more details, check the Chassis Components section of this manual or the Supermicro Website at www.supermicro.com. -
Page 11: Contacting Supermicro
Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: Super Micro Computer B.V. Het Sterrenbeeld 28, 5215 ML... -
Page 12: Returning Merchandise For Service
For faster service, RMA authorizations may be requested online (http://www. supermicro.com/support/rma/). Whenever possible, repack the chassis in the original Supermicro carton, using the original packaging material. If these are no longer available, be sure to pack the chassis securely, using packaging material to surround the chassis so that it does not shift within the carton and become damaged during shipping. -
Page 13: Chapter 2 System Safety
Chapter 2: System Safety Chapter 2 System Safety Overview This chapter provides a quick setup checklist to get your chassis up and running. Following the steps in order given should enable you to have your chassis setup and operational within a minimal amount of time. This quick setup assumes that you are an experienced technician, famailiar with common concepts and terminology. - Page 14 SC512F Chassis Manual • Power should always be disconnected from the system when removing or install- ing main system components, such as the serverboard, memory modules and the DVD-ROM and peripheral drives (not necessary for hot-swappable drives). When disconnecting power, you should first power down the system with the operating system and then unplug the power cords from all the power supply modules in the system.
-
Page 15: General Safety Precautions
Chapter 2: System Safety General Safety Precautions • Keep the area around the chassis clean and free of clutter. • Place the chassis top cover and any system components that have been re- moved away from the system or on a table so that they won’t accidentally be stepped on. - Page 16 SC512F Chassis Manual • Do not let components or PCBs come into contact with your clothing, which may retain a charge even if you are wearing a wrist strap. • Handle a board by its edges only; do not touch its components, peripheral chips, memory modules or contacts.
-
Page 17: Chapter 3 Chassis Components
Depending on the model, the SC512 chassis may include one slim DVD-ROM/CD- ROM bay, at least one fixed hard drive, a floppy drive, and/or two USB ports. For the latest shipping lists, visit our Web site at: http://www.supermicro.com. Fans The SC512 model chassis accepts two or three system fans powered by the moth- erboard. -
Page 18: Power Supply
Supermicro Authorized Distributors/ System Integrators/Resellers. A list of Supermicro Authorized Distributors/System Integrators/Reseller can be found at: http://www.supermicro.com. Click the Where to Buy link. Chassis Model Options The following section lists the different options which are available for each of the different chassis models in the SC512 chassis family of products. - Page 19 Chapter 3: Chassis Components Air blower unit included in chassis models SC512, SC512C and SC512L Figure 3-1: Blower-Cooled Chassis Model System fans included in chassis model SC512F Figure 3-2: Fan-Cooled Chassis Model...
-
Page 20: Model Sc512
SC512 Chassis Manual Model SC512 Includes a slot with a dummy cover plate where an optional DVD-ROM drive may be installed, and a 200 or 260 Watt power supply. The SC512 model chassis is cooled with an internal blower unit. Dummy Cover Plate for Optional DVD Drive... -
Page 21: Model Sc512C
Chapter 3: Chassis Components Model SC512C The SC512C includes a DVD-ROM drive, floppy drive, USB ports and a 200 or 260 Watt power supply. The SC512C model chassis is cooled with an internal blower unit. DVD-ROM Drive USB Ports Floppy Drive Figure 3-4: Chassis Model SC512C SC512C-200 Chassis... -
Page 22: Model Sc512F
SC512 Chassis Manual Model SC512F The SC512F models may include a DVD-ROM drive, USB ports and a 260, 280, 350, 410, 520 or 600 Watt power supply. The SC512F-280 and 350 models can support a second optional hard disk drive. The SC512F-280/350/410/520/600 model chassis have a wider chassis design, which mounts in a standard rack utilizing special mounting rails. - Page 23 Chapter 3: Chassis Components DVD-ROM Drive USB Ports Figure 3-8: Chassis Models SC512F-410 and SC512F-520 SC512F-520 Chassis Blower/ DVD/CD Floppy Power Slots Supply Standard 3x Fans 1x DVD 520 Watt Fixed High- 3.5" Efficiency SC512F-410 Chassis Blower/ DVD/ Floppy Power Slots Supply Standard...
- Page 24 SC512 Chassis Manual Figure 3-10: Chassis Models SC512F-520L and SC512F-600L SC512F-520L Chassis Blower/ DVD/CD Floppy Power Slots Supply Standard 3x Fans 520 Watt Fixed High 3.5" Efficiency SC512F-600L Chassis Blower/ DVD/CD Floppy Power Slots Supply Standard 3x Fans 600 Watt Fixed Gold 3.5"...
-
Page 25: Model Sc512L
Chapter 3: Chassis Components Model SC512L The SC512L models include two 3.5" hard disk drives and a 200 or 260 Watt power supply. The SC512L model chassis is cooled with an internal blower unit. Figure 3-11: Chassis Models SC512L-200 and SC512L-260 SC512L-200 Chassis Blower/... - Page 26 SC512 Chassis Manual Notes 3-10...
-
Page 27: Chapter 4 System Interface
Chapter 4: System Interface Chapter 4 System Interface Overview There are several LEDs on the control panel and on the drive carriers to keep you constantly informed of the overall status of the system, as well as the activity and health of specific components. -
Page 28: Control Panel Buttons
SC512 Chassis Manual Control Panel Buttons There are two push-buttons located on the front of the chassis. These are a reset button and a power on/off button. Reset: The reset button is used to reboot the system. Power: The main power switch is used to apply or remove power from the power supply to the server system. - Page 29 Chapter 4: System Interface NIC2: Indicates network activity on GLAN2 when flashing. NIC1: Indicates network activity on GLAN1 when flashing. HDD: Indicates IDE channel activity. SAS/SATA drive and/or DVD-ROM drive activity when flashing. Power: Indicates power is being supplied to the system's power supply units. This LED should normally be illuminated when the system is operating.
- Page 30 SC512 Chassis Manual Notes...
-
Page 31: Chapter 5 Chassis Setup And Maintenance
Chapter 5: Chassis Setup and Maintenance Chapter 5 Chassis Setup and Maintenance Overview This chapter covers the steps required to install components and perform mainte- nance on the chassis. The only tool you will need to install components and perform maintenance is a Phillips head and a flathead screwdriver. -
Page 32: Removing The Chassis Cover
SC512 Chassis Manual Removing the Chassis Cover Remove these screws Remove these screws HARD DRIVE Flat head Remove this screw 6-32 x 5 mm [0.197] PPY DRIVE Figure 5-1: Removing the Chassis Cover Round head Round head Removing the Chassis Cover 2.6 x 5 mm 3 x 5 mm [0.197]... -
Page 33: Installing Hard Drives
Chapter 5: Chassis Setup and Maintenance Installing Hard Drives Remove these screws HARD DRIVE Flat head 6-32 x 5 mm [0.197] OPPY DRIVE Round head Round head DVD-ROM/CD-ROM 2.6 x 5 mm 3 x 5 mm Drive [0.197] [0.197] und head Flat head x 4 mm M5 x 12 mm [0.472]... - Page 34 SC512 Chassis Manual HARD DRIVE Hard Drive Flat head Pan head 6-32 x 5 mm 6-32 x 5 mm [0.197] [0.197] DVD-ROM CD-ROM FLOPPY DRIVE Flat head Round head Pan head Round head 6-32 x 5 mm 2.6 x 5 mm 3 x 5 mm 6-32 x 5 mm [0.197]...
-
Page 35: Installing The Motherboard
Chapter 5: Chassis Setup and Maintenance Installing the Motherboard HARD DRIVE Flat head Pan head 6-32 x 5 mm 6-32 x 5 mm [0.197] [0.197] DVD-ROM CD-ROM FLOPPY DRIVE Figure 5-5: The SC512 Backplate (I/O Shield) Important Motherboard Installation Information Before installing the motherboard, be aware of the following: Flat head Round head... -
Page 36: Standoffs
HARD DRIVE SC512 Chassis Manual Standoffs Flat head Standoffs prevent short circuits by securing space between the motherboard and 6-32 x 5 mm the chassis surface. The SC512 chassis includes permanent standoffs in locations [0.197] used by most motherboards. These standoffs accept the rounded Phillips head FLOPPY DRIVE screws included in the SC512 accessories packaging. -
Page 37: Installing The Dvd Or Cd-Rom Drive
Chapter 5: Chassis Setup and Maintenance Installing the DVD or CD-ROM Drive HARD DRIVE Replace these screws Flat head 6-32 x 5 mm [0.197] OPPY DRIVE Round head Round head 2.6 x 5 mm 3 x 5 mm [0.197] [0.197] DVD-ROM/CD-ROM Drive d head... -
Page 38: Pci Slot Setup
SC512 Chassis Manual PCI Slot Setup SC512 chassis includes a slot for one full height/full length expansion card and a riser card. The riser card allows the expansion card to fit within the small 1U form. The PCI slot does not require a screw to hold the card in place. PCI Slot Clip Expansion Card Slot Shield... -
Page 39: Installing The Air Shroud
Chapter 5: Chassis Setup and Maintenance Installing the Air Shroud The air shroud helps cool the chassis by directing heated air through the rear of the chassis. When installing the air fan, be aware of the following: • The air shroud is designed to fit within the chassis. The sides of the air shroud should remain straight in relation to the top. -
Page 40: Installation Complete
SC512 Chassis Manual Installation Complete In most cases, the chassis power supply and the fans or blower are pre-installed. If you need to install fans, a blower or a power supply, see the following sections of this chapter. If you need to replace the chassis LED panel, see the end of this chapter. -
Page 41: System Fans/Blower
Chapter 5: Chassis Setup and Maintenance System Fans/Blower SC512F model chassiss are cooled with system fans. Three heavy-duty fans provide cooling for the chassis. These fans circulate air through the chassis as a means of lowering the chassis internal temperature. The SC512F-280 chassis accepts two fans instead of three. -
Page 42: System Fan Tray Replacement
SC512 Chassis Manual System Fan Tray Replacement Installing the System Fan Tray Power down the system. Disconnect each fan from the motherboard. Lift the system fan tray and fans from the chassis. Retain the rubber mount- ings that encircle the tray rivets. Place the fans into the new system fan tray. -
Page 43: Blower Setup
Chapter 5: Chassis Setup and Maintenance Blower Setup SC512 chassis models SC512, SC512C and SC512L are blower-cooled. In the unlikely event that the blower fails, replacement is simple and can be accomplished with a Phillips head screwdriver. Replacing the Blower Disconnect the chassis from any power source. - Page 44 SC512 Chassis Manual Checking the Airflow in the Chassis Make sure there are no objects to obstruct airflow in and out of the server. Do not operate the server without drives or drive trays in the drive bays. Use only recommended server parts. Make sure no wires or foreign objects obstruct air flow through the chassis.
-
Page 45: Power Supply
The SC512 series chassis has one power supply. In the unlikely event that the power supply unit fails, the system will shut down and you will need to replace it. Replacement units can be ordered directly from Supermicro (see contact information in the preface) or an authorized reseller. - Page 46 SC512 Chassis Manual Remove these screws HARD DRIVE Power Supply Pan Head Flat head 6-32 x 5mm Pan head [0.197] 6-32 x 5 mm 6-32 x 5 mm Remove this screw [0.197] [0.197] Figure 5-13: Removing the Power Supply DVD-ROM CD-ROM FLOPPY DRIVE Replacing the Power Supply Disconnect the power cord from the from the chassis to ensure that the unit is not accidentally plugged in.
-
Page 47: Replacing The Chassis Led Panel
Replacing the Chassis LED Panel In the unlikely event that the chassis LED and buttons fail, the panel can be replaced. Replacement parts can be ordered from Supermicro or an authorized reseller. Replacing the Chassis LED Panel Power down and unplug the system. - Page 48 SC512 Chassis Manual Notes 5-18...
-
Page 49: Chapter 6 Rack Installation
Chapter 6: Rack Installation Chapter 6 Rack Installation Overview This chapter provides a quick setup checklist to install the chassis into a rack. Unpacking the System You should inspect the box the chassis was shipped in and note if it was damaged in any way. -
Page 50: Rack Precautions
SC512 Chassis Manual Warnings and Precautions! Rack Precautions • Ensure that the leveling jacks on the bottom of the rack are fully extended to the floor with the full weight of the rack resting on them. • In single rack installation, stabilizers should be attached to the rack. •... -
Page 51: Rack Mounting Considerations
Chapter 6: Rack Installation Rack Mounting Considerations Ambient Operating Temperature If installed in a closed or multi-unit rack assembly, the ambient operating tempera- ture of the rack environment may be greater than the ambient temperature of the room. Therefore, consideration should be given to installing the equipment in an environment compatible with the manufacturer’s maximum rated ambient tempera- ture (Tmra). -
Page 52: Rack Mounting Instructions
SC512 Chassis Manual Rack Mounting Instructions This section provides information on installing the SC512 chassis into a rack unit with the rails provided. There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly. You should also refer to the installation instructions that came with the rack unit you are using. -
Page 53: Installing The Inner Rail Extension
Pan head Chapter 6: Rack Installation 6-32 x 5 mm [0.197] Installing the Inner Rail Extension DVD-ROM CD-ROM F The SC512F includes chassis ears that you must remove before installing the rails. Removing the Chassis Ears Locate and remove the three screws holding the chassis ear in place. Flat head Pan head 6-32 x 5 m... -
Page 54: Installing The Outer Rails To The Rack
[0.197] [0.197] SC512 Chassis Manual Flat head M5 x 12 mm [0.472] Washer for M5 Secure to the Rear of the Rack Thumb screw ) standoff Attach Outer Rack Rails 6-32 x 5 mm [0.197] 6-32 together Secure to the Front of the Rack Figure 6-3: Assembling the Outer Rails Installing the Outer Rails to the Rack... - Page 55 Chapter 6: Rack Installation SCALE 0.380 Figure 6-4: Installing the Outer Rails to the Server Rack...
-
Page 56: Installing The Chassis Into A Rack
SC512 Chassis Manual Figure 6-5: Installing the Chassis into a Rack Installing the Chassis into a Rack Installing the Chassis Confirm that the inner rails are attached to the chassis. Also, confirm that the outer rails are installed on the rack. Align chassis rails with the front of the rack rails. -
Page 57: Mid-Mount Telco Rack
Chapter 6: Rack Installation HARD DRIVE Mid-Mount Telco Rack The SC512.supports Telco rack installation. The SC512 chassis compact design allows the chassis to be installed into a Telco rack without the use of rails. Flat head Pan head 6-32 x 5 mm 6-32 x 5 mm [0.197] [0.197]... - Page 58 [0.197] [0.197] SC512 Chassis Manual SCALE Flat head M5 x 12 mm [0.472] Washer for M5 Thumb screw ) standoff 6-32 x 5 mm [0.197] 6-32 SCALE Figure 6-7: Installing the Server into a Telco Rack Hold the chassis in the telco rack and screw the chassis to the rack using the three screw holes located in the chassis ears.
-
Page 59: Appendix A Cables, Screws, And Other Accessories
This appendix lists supported cables for your chassis system. It only includes the most commonly used components and configurations. For more compatible cables, refer to the manufacturer of the motherboard you are using and our Web site at: www.supermicro.com. A-2 Cables Included with SC512 Chassis SC512-200 and SC512-260... - Page 60 SC512 Chassis Manual SC512F-280 Part # Type Length Description 7-pin SATA with two 90 degree side CBL-0142L Cable 30 cm (~12") connectors (lead free). CBL-0156L Cable 40 cm 16-pin to 16-pin FP cable. Lead free. CBL-0084L Wire 9 cm DVD cable. Lead free. Cable Regional power cord SC512F-350...
- Page 61 Appendix A: SC512 Chassis Cables SC512F-520L and SC512F-600L Part # Type Length Description 7-pin SATA with two 90 degree side CBL-0142L Cable 30 cm (~12") connectors (lead free). CBL-0156L Cable 40 cm 16-pin to 16-pin FP cable (lead free). Cable Regional power cord SC512L-200 and SC512L-260 Part #...
-
Page 62: Extending Power Cables
SC512 Chassis Manual Extending Power Cables Although Supermicro chassis are designed with to be efficient and cost-effective, some compatible motherboards have power connectors located in different areas. To use these motherboards you may have to extend the power cables to the mother boards. - Page 63 Appendix A: SC512 Chassis Cables A-3 Routing the Chassis Cables In order for the SC512 chassis to perform safely and efficiently, it is important that the cables are routed correctly. Follow the instructions below and review both the cabling diagram and photograph to ensure that the cabling has been properly routed. Preparing the Chassis for Cable Routing Unplug the chassis from any power source.
- Page 64 SC512 Chassis Manual Routing Cable (1A) from Hard Drive (1B) Plug cable (1A) into the SATA port of hard drive (1B). Lift up the fan and run cable (1A) straight out from the port and under the fan. Route cable (1A) over the hard drive and through the left middle bracket. Plug cable (1A) into upper SATA port (1C) on the motherboard.
- Page 65 Appendix A: SC512 Chassis Cables Checking the Cable Routing Check the cable routing by following out each cable in the previous steps and comparing them to the diagram in Figure A-1, and the photograph in Figure A-2. Figure A-2: Chassis Cable Routing...
- Page 66 SC512 Chassis Manual A-4 Chassis Screws The Chassis and accessory box include all the screws needed to setup your chassis. This section include descriptions of the most common screws used. Your chassis may not require all the parts listed. HARD DRIVE Flat head Pan head 6-32 x 5 mm...
-
Page 67: Appendix B Power Supply Specifications
Appendix B: SC512F Power Supply Specifications Appendix B Power Supply Specifications This appendix lists power supply specifications for your chassis system. SC512 Chassis Model MFR Part # PWS-201-1H PWS-0055 100 - 240V 100 - 240V Rated AC Voltage 50 - 60Hz 60 - 50Hz 4 - 2A Max 4A Max... - Page 68 SC512 Chassis Manual SC512F Chassis Models (See below for 410 model) 520/520L 600/600L PWS-0055 PWS-281-1H PWS-351-1H PWS-521-1H PWS-601-1H Part # Rated 100 - 240V 100 - 240V 100-240 V, 100 - 240V 100 - 240V 60 - 50Hz 50 - 60Hz 50-60 Hz, 50 - 60Hz 50 - 60Hz...
- Page 69 Appendix B: SC512F Power Supply Specifications Notes...
- Page 70 SC512 Chassis Manual Disclaimer (cont.) The products sold by Supermicro are not intended for and will not be used in life sup- port systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to per- form be reasonably expected to result in significant injury or loss of life or catastrophic property damage.
Need help?
Do you have a question about the Supero SC512 Series and is the answer not in the manual?
Questions and answers