Mixing Guide - Sunbeam Mixmaster Classic MX8500 Instruction Booklet

Using your Mixmaster
5.Once you have selected the bowl you wish
to use, place it on the base. Gently rotate
the bowl in a clockwise direction until it
drops into position (Figure 7). Continue
rotating until the bowl clicks into place.
The bowl should feel firm.
Note: The mixer head must be tilted
backwards for the bowl to be locked onto
the turntable.
(7)
6.Lower the head with the selected mixing
attachments in place into the mixing bowl.
To do this press the 'TILT &LOCK' button.
While the button is depressed hold the
handle (Figure 8) and ease the head of the
bench mixer down (Figure 9).
(8)
6
Classic continued
®
(9)
Using your Mixmaster
1.Position the mixer on a level, dry
2.With the speed control dial in the 'Off'
3.The speed control dial turns the bench
(10)
TILT
BUTTON
Clearly marked instructions for correct mixing
speeds for each type of mixture are shown in
the 'Mixing Guide' on page 8.
®
surface such as a bench top. Ensure the
mixing bowl is in place and the desired
attachments are inserted.
position, plug the power cord into a
230/240 Volt AC power outlet.
mixer on and off, controlling the beater
speed. Turn the speed control dial to the
right or upwards to commence mixing
(Figure 10).
TILT
BUTTON
Bench Mixer