FortiGate-4000 Installation and Configuration Guide Version 2.50
Getting started
FortiGate-4000 Installation and Configuration Guide
This chapter describes unpacking, setting up, and powering on a FortiGate-4000
Antivirus Firewall. When you have completed the procedures in this chapter, you can
proceed to one of the following:
•
If you are going to operate the FortiGate unit in NAT/Route mode, go to
"NAT/Route mode installation" on page
•
If you are going to operate the FortiGate unit in Transparent mode, go to
"Transparent mode installation" on page
•
If you are going to operate two or more FortiGate units in HA mode, go to
availability" on page
This chapter describes:
•
Warnings and cautions
•
Package contents
•
Physical description
•
Front panel features
•
Rear panel features
•
Installing hardware
•
Turning FortiGate-4000 chassis power on and off
•
Hot swapping modules
•
Connecting to the web-based manager
•
Connecting to the Command Line Interface (CLI)
•
Factory default configuration
•
Planning the FortiGate configuration
•
FortiGate model maximum values matrix
•
Next steps
61.
69.
81.
"High
25