Turning The Pnd Display On And Off; Attachment And Detachment The Pnd - Subaru AUDIO VIDEO & NAVIGATION SYSTEM Owner's Manual

Turning the PND Display ON and OFF

(1) When the PND display is OFF, press the
[SCREEN AV/NAV] button.
The PND display will come ON.
(2) When the PND display is ON, hold down
the [MUTE] button for 1 or more
seconds.
The PND display will go OFF.

Attachment and Detachment the PND

■
Using the PND
CAUTION
To avoid injury, use the audio cover when the PND
is removed.
■
How to Detach the PND from the Main Unit
IMPORTANT
• When detaching the PND, Do not touch the
PND rear connector.
• After detaching the PND, mount
connector cover to the PND rear side.
• Do not attach the PND to the audio unit
when connector cover is mounted.
• When attaching the PND, do not press the
monitor display.
• If the PND gets wet, do not attach it to the
main unit.
• When the PND is detached, the audio cover
should be installed.
(1) Press the [Release] button.
The right-hand side of PND will be unlatched
from this receiver.
- 15 -
(2) Remove the PND.
Hold the PND on the right side, lift up and pull it
toward you to remove it.
the
Operation