Basic Troubleshooting Tips - Stairmaster Zephyr Assembly Instructions & Owner's Manual

P 11
AGE
PROBLEM DESCRIPTION
NO DISPLAY
PRODUCT WILL NOT SIT LEVEL
SEAT POST MOVEMENT
PEDAL WOBBLE
NO SPEED READING
Make sure to reference the assembly steps & parts information in this manual when performing any troubleshooting.
If you experience other technical problems that are not listed or have additional questions, please contact the original
retailer or call us at 1-888-678-2476.

BASIC TROUBLESHOOTING TIPS

BASIC TROUBLESHOOTING TIPS
1)
CHECK BATTERY ORIENTATION: + / -
2)
CHECK BATTERY VOLTAGE: (2) AA BATTERIES 1.5 VOLTS EACH
CHECK CABLE CONNECTIONS: MAKE SURE CONNECTIONS ARE
3)
SECURE AND IN THE CORRECT ORIENTATION.
CHECK CABLE ASSEMBLIES FOR DAMAGE: PINCH POINTS &
4)
POSSIBLE SHORTING OF WIRES.
CHECK FOR POSSIBLE COMPUTER DAMAGE: CRACKED DISPLAY
5)
WINDOW (BLACK SCREEN).
If computer still fails to operate after checking these suggestions,
*
contact us for technical support.
USE LEVELERS ON THE BOTTOM OF THE STABILIZERS TO ADJUST
1)
EQUIPMENT TO UNEVEN SURFACES.
MAKE SURE THE ADJUSTMENT KNOB IS LOCKED INTO A SEAT
1)
POST HOLE.
SECURELY TIGHTEN THE SEAT POST IN PLACE BY TURNING THE
2)
ADJUSTMENT KNOB.
CHECK TO MAKE SURE PEDALS ARE INSTALLED CORRECTLY
1)
(ORIENTATION) AND MOUNTED FLUSH WITH THE CRANK ARMS.
LOOSEN THE PEDALS, CHECK FOR POSSIBLE CROSS-THREADING
2)
OF CRANK ARMS.
CHECK COMPUTER CONNECTION: MAKE SURE CONNECTORS ARE
1)
SECURE AND IN THE CORRECT ORIENTATION.
CHECK SPEED SENSOR. CONFIRM CABLE CONNECTION AND
2)
ALIGNMENT WITH MAGNET.
SUGGESTED SOLUTION
T
ROUBLESHOOTING