Table of Contents
Advertisement
Chapter 2 – Qio Enclosure Description
1 – Power Indicator LED
This indicator lights when Qio is powered, the Sonnet adapter
card is installed properly in its slot, the PCIe cable between
the two is plugged in properly, and the computer powered on
2 – SxS Media Slots
These slots accept both SxS memory cards and ExpressCard/34
adapter cards. Use the included Sonnet multimedia memory
card adapter in these slots to work with Memory Stick, SDXC,
SDHC, SD, MMC, and xD-Picture memory cards
6 – Security Slot
This slot works with Kensington
locks to secure the Qio enclosure and deter theft
7 – eSATA Ports
These connect eSATA data cables. Each port supports
individual drives, or up to four SATA hard disk drives (or
SSDs) in enclosures with an eSATA interface, and a built-in
hardware RAID controller or port multiplier
8 – PCIe x1 Connector
This connects the included interface cable between the Qio
enclosure and the PCIe bus extender card in your computer
brand and similar security
®
3 – P2 Media Slots
These slots accept P2 memory cards
4 – Eject Buttons for P2 Media Slots
Press these buttons to eject cards from the P2 slots
5 – CF (CompactFlash) Card Slots
These slots accept Type I CF memory cards. Qio is not
compatible with Type II (Microdrive, etc.; 5mm thick) CF cards
9 – 12VDC Input Socket
Connect either the included AC power adapter cable, or the
optional XLR power adapter cable (connected to an external
battery or other power source) to power the Qio enclosure
10 – 12VDC Output Sockets
Use these sockets to power connected Sonnet Fusion
2-drive RAID SATA storage systems. DO NOT CONNECT
POWER INPUT CABLES HERE
2
F2
™
Advertisement
Table of Contents
