Table of Contents
Advertisement
Chapter 4 – BIOS Setup and Software Installation Steps
B – Software Download (continued)
4. When the window showing the contents of the .zip file
appears, locate and click the Extract Files button.
5. When the Extract Compressed (Zipped) Folders window
appears, click Browse.
6. When Select a destination window appears, click to choose
a destination, and then click Make New Folder. Name the
folder Qio Installers, and then click Extract.
C – SxS Drivers Installation
1. Open the Qio Installers folder, and then double-click the
SxS_Driver_Installer_xxx file; when the Open File – Security
Warning window appears, click Run.
2. When the SxS device driver InstallShield Wizard window
appears, click Next.
3. When the next window appears, click Install; the drivers are
installed.
4. When the Install Wizard Complete window appears, click
Finish.
D – P2 Drivers Installation
S upport Note:
Installation of the drivers to support
Panasonic P2 media requires that a P2 memory card be
inserted into one of the Qio's P2 slots at the time the installer is
run. Otherwise, the installer will not work. If you don't have a P2
card, you may run this installer at a later time.
1. Open the Qio Installers folder, and then open the P2Winx64
folder if you are using a 64-bit version of Windows;
otherwise, open the P2Winx32 folder.
2. Double-click Setup.exe to launch the installer.
3. When the Open File – Security Warning window appears, click
Run.
4. When the Panasonic P2 Drivers InstallShield Wizard window
appears, click Next.
5. When the License Agreement window appears, read the
agreement, select "I accept the terms in the license
agreement", and then click Next.
6. When the Destination Folder window appears, either accept the
default location or choose a new one, and then click Next.
7. When the Ready to Install the Program window appears, click
Install.
8. When the Panasonic P2 Installation Window appears, select
the "P2 card CardBus driver (2 slot(s))" checkbox, and then
click OK.
9. When a prompt appears instructing you to insert P2 cards,
insert a P2 card into either of the Qio's P2 slots, and then
click Install (if Windows Security windows appear, click
Install); the drivers are installed.
10. When the Install Wizard Completed window appears, click
Finish.
11. When the Panasonic P2 Drivers Installer Information window
appears, click Yes to restart your computer.
E – SATA Drivers Installation
1. Open the Qio Installers folder, and then open the Tempo
SATA Installer folder.
2. If you are using a 64-bit version of Windows, double-click
Tempo SATA Installer 64; otherwise, double-click Tempo
SATA Installer.
3. When the Open File – Security Warning window appears, click
Run.
4. When the Tempo SATA Installer window appears, click Next.
5. When the End User License Agreement window appears, read
the agreement, select "I accept this EULA", and then click
Next.
6. When the next window appears click Finish. If a window
appears stating the driver installation failed, click OK; please
note this is normal and will be "fixed" in the following steps.
7. Restart the computer.
8. Click Start > Control Panel. In the Control Panel window,
click Device Manager. If you haven't disabled User Account
Control (UAC), a UAC window will appear; click Continue.
9. When the Device Manager window appears, click the arrow
next to Storage Controllers to expand the list. If "Sonnet
Tempo SATA QIO PCI Express Adapter" appears in the list,
your installation is complete and the Qio is ready to use.
Otherwise, go to the next step.
10. Click the arrow next to IDE ATA/ATAPI controllers to
expand the list. If there is only one "Standard Dual Channel
PCI IDE Controller" listed, double-click it and then skip to
step 14. Otherwise, go to the next step.
11. Select the first "Standard Dual Channel PCI IDE Controller"
listed, right-click and then select Properties.
12. When the Standard Dual Channel PCI IDE Controller Properties
window appears, select the Details tab, and then click on the
Property drop-down menu and select Hardware id.
6
Advertisement
Table of Contents
