Select The Local Host; Select The Controller; Select A Channel; Select A Device - Sonnet Fusion RAID Storage Systems Operation Manual

1.0 ATTO Configuration Tool Overview

Select the Local Host

The following tabs display in the Configuration Options window
when you select the local host in the Device Listing window:
• T he Basic Info tab displays information about the booted
operating system. See Figure 1 on page 3.
• T he Notifications tab allows you to set up notification of
certain events in the Sonnet RAID controller. Refer to RAID
Event Notifications on page 23.
• T he SNMP tab allows you to configure SNMP monitoring and
trap generation for the 3 Gb/s Sonnet RAID controller. Refer to
SNMP Configuration on page 45.
About window
The About window, displayed when About is selected from the
Help menu, lists the ATTO Configuration Tool's version number.

Select the Controller

The following tabs are displayed in the Configuration Options
pane when you select the Sonnet RAID controller in the Device
Listing pane:
• T he Basic Info tab provides information about the Sonnet
RAID controller when it is highlighted in the Device Listing
pane. You cannot make changes from this screen. See Figure 2
on page 3.
• T he Flash tab provides information about the current flash
version programmed on the highlighted controller. See Figure 3
on page 4.
Click the Browse button at the bottom of the tab
to search for new flash files on your system such as
FlashBundle_2007_02_27.R380. Once you've selected the flash
file, click the Update button to automatically update your
Sonnet RAID controller.
• T he RAID tab provides information about attached drives,
their RAID group and Hot Spare associations, and their
operating status. With the RAID tab selected, you can create,
modify, and delete RAID groups. You may also schedule or
start diagnostic and maintenance procedures, start individual
drive performance testing, and send commands to attached
enclosures to identify drives. See Figure 4 on page 4.
• T he RAID CLI tab provides access to the command line
interface, which, as an alternative to application menu-based
commands, enables the use of ASCII-based commands to
control configuration and diagnostic tasks. See Figure 5 on
page 5.
• T he Tasks tab provides information about user-scheduled hard
drive health maintenance. In this tab, you can reschedule or
delete tasks. See Figure 6 on page 5.
• T he Advanced tab does not function with the Sonnet RAID
controller; clicking this tab merely displays a message.

Select a Channel

The following tabs display in the right pane when you select a
specific channel in the Device Listing pane:
• W hen you select a specific channel under the Sonnet RAID
controller in the Device Listing pane, the NVRAM tab displays
the NVRAM parameters applicable to the Sonnet RAID
controller and channel selected. Refer to RAID Controller
NVRAM Settings on page 7, and Configuration Tool
Troubleshooting on page 51 for information about NVRAM
settings.
• T he Basic Info tab displays PCI information for the selected
channel. See Figure 7 on page 6.
• T he current status of the Configuration Tool is represented in
the Status pane at the bottom of the window.
About window
The About window, displayed when About is selected from the
Help menu, lists the ATTO Configuration Tool's version number.
Support Note:
Fusion D400RAID, Fusion D800RAID, nor Fusion R800RAID
storage systems.

Select a Device

The following tabs display in the right pane when you select a
specific device in the Device Listing pane:
• T he Basic Info tab displays information about the selected
enclosure or SAS expander.
• T he Flash tab does not function with the Fusion storage
systems; clicking this tab merely displays a message.
Support Note:
enclosure with one or two SAS expanders, such as Fusion
DX800RAID, or Fusion RX1600RAID, is used.
• T he SES tab displays SES (SCSI Enclosure Services) status
information for SES devices such as power supplies and fans.
See Figure 8 on page 6.
2
The following feature does not work with
The SES tab appears only when an