Sonnet Fusion RAID Storage Systems Operation Manual page 67

Appendix A - CLI ASCII-Based Interface
CLI Summary
The following chart summarizes the Command Line Interface
commands, their defaults, and an example of how to enter the
commands. Please note that commands which have no default
values have a blank entry in that column of the table.
WARNING:
Do not use the CLI unless you are directed
to by a Sonnet technician, as changing parameters may
cause loss of data and/or disruption to performance and
reliability of the Fusion storage system.
Command
AutoMap
AutoMapOnBoot
AutoResume
BlockDevClean
BlockDevIdentify
BlockDevIDStop
BlockDevInfo
BlockDevScan
ClearEventLog
Date
DeleteScheduledTasks
DisplayScheduledTasks
DriveAssureReport
DriveHealth
DriveHealthDisplay
DriveHealthStatus
DriveTest
DriveTestClearList
DriveTestConfig
DriveTestList
DriveTestStatus
DumpConfiguration
DumpEventLog
EventLog
EventLogFilter
Help
HSAdd
Default
enabled
rebuild = enabled, erase = disabled, initialize
= enabled
disabled
not initiated
enabled
all all all
iii
Example
automap
set automaponboot enabled
set autoresume erase enabled raidgroup1
blockdevclean 30
blockdevidentify 30
blockdevidstop
blockdevinfo 30
blockdevscan
cleareventlog
set date 03/03/2009
deletescheduledtasks
displayscheduledtasks
driveassurereport raidgroup1
set drivehealth enabled
drivehealthdisplay all
drivehealthstatus
drivetest begin
drivetestclearlist all
set drivetestconfig read
get drivetestlist all
get driveteststatus
dumpconfiguration
dumpeventlog
set eventlog disabled
set eventlogfilter gen info all
help eventlog
hsadd 3