• If unusual smells, sounds, or smoke come from the device, or if liquids enter it, disconnect the power cable immediately. • Follow the instructions in this manual carefully; contact Sonnet Customer Service for additional advice not covered in this...
Page 3
This section describes the process of creating a RAID set using Disk Utility under Mac OS X Version 10.5; steps for formatting under Mac OS X Version 10.6 are nearly identical. If you are using Fusion F2 with a computer running Windows, go to the next page for drive formatting information.
Page 4
Windows Drive Formatting & Configuration Figure 6 This section describes the process of formatting and configuring Fusion F2’s drives under Windows Vista; steps for formatting under Windows 7 and XP Professional are nearly identical. 1. Start Windows, and then click Start > Control Panel.
Page 5
9. Type “clean” and then press Enter to erase all the information on the drive and prepare it for formatting by Windows (Figure 9). 10. Repeat steps 8 and 9 for the other Fusion F2 drive, and then close both the DISKPART and Command windows.
Need help?
Do you have a question about the FUSION F2 and is the answer not in the manual?
Questions and answers