Powering On - Fortinet FortiGate 100 Installation & Configuration Manual

Getting started

Powering on

FortiGate-100 Installation and Configuration Guide
Environmental specifications
• Operating temperature: 32 to 104°F (0 to 40°C)
• Storage temperature: -13 to 158°F (-25 to 70°C)
• Humidity: 5 to 95% non-condensing
To power on the FortiGate-100 unit:
1 Connect the AC adapter to the power connection at the back of the FortiGate-100 unit.
2 Connect the AC adapter to the power cable.
3 Connect the power cable to a power outlet.
The FortiGate-100 unit starts up. The Power and Status lights light. The Status light
flashes while the FortiGate-100 unit is starting up and remains lit when the system is
up and running.
Table 1: FortiGate-100 LED indicators
LED
Power
Status
Internal
External
DMZ
(front)
Internal
External
DMZ
interfaces
(back)
State Description
Green The FortiGate unit is powered on.
Off The FortiGate unit is powered off.
Flashing The FortiGate unit is starting up.
green
Green The FortiGate unit is running normally.
Off The FortiGate unit is powered off.
Green The correct cable is in use, and the connected equipment has
power.
Flashing Network activity at this interface.
green
Off No link established.
Green The correct cable is in use, and the connected equipment has
power.
Flashing Network activity at this interface.
amber
Off No link established.
29