Advertisement
Description: Sets the port for https requests.
webserver_type
Valid values: <http>, <https>, <http_https>, <off>
Default: http_https
Description: Sets the connection type of http requests which are allowed.
lcserver1, lcserver2
Valid values: e.g. <192.168.0.26>
Default: Blank (to use local LCServer on device)
Description: IP addresses of an alternative remote LCServer. You will not usually need to
change this setting, it is for snom internal use only.
vlan
Valid values: integers separated by a space, e.g. <
Default: Blank
Description: VLAN ID (0..4095) and Priority (0..7) separated by a space
Update
update_policy
Valid values: <auto_update>, <ask_for_update>, <never_update_firm>, <never_
update_boot>, <settings_only>, <never_update>
Default: settings_only
Description: Determines the update behavior of the phone. <never_update> does not
connect a server regarding settings or updates at all, <settings_only> loads settings
only from settings server. <auto_update> does not ask again whether you are sure you
want to update.
setting_server
Valid
values:
<130.149.12.54>
Default: blank
Description: URL of the settings file.
firmware_status
Valid values: e.g. <http://www.company.com/settings/snom200-firmware.htm>
Default: Blank
Description: URL of the config file that consists of the bootloader and firmware setting,
see below.
bootloader, firmware
Valid
values:
<130.149.12.54>
18
[ F
A
R E Q U E N T L Y
e.g.
<http://www.company.com/settings/snom200.htm>,
e.g.
<http://www.company.com/files/snom200ABC.bin>,
Q
S K E D
U E S T I O N
128 5
>
]
snom technology AG
Advertisement
