Snom Configuring phones for Mass Deployment Frequently Asked Questions Manual page 15

packet_size
Valid values: <80>, <160>, <240>, <320>
Default: 160
Description: Packet size in bytes. Affects only ulaw and alaw codecs (other codecs have
fixed packet size). 80 (10 ms), 160 (20 ms), 240 (30 ms) and 320 (40 ms) bytes are
available.
dtmf_type_outofband
Valid values: <true>, <false>
Default: true
Description: Options for Out of band DTMF. <true> forces the use of Out of band DTMF,
<false> turns it off. It is used for H.323 only!
dtmf_type_inband
Valid values: <true>, <false>
Default: on
Description: Options for In band DTMF. <true> forces the use of In band DTMF, <false>
turns it off. It is used for H.323 only !
dtmf_payload_type
Valid values: Integer values, e.g. <100>, <150>.
Default: 101
Description: Payload type for Out of band DTMF.
codec_negotiation
Valid values: <single>, <full>, <interoperable>
Default: Interoperable
Description: <single> option offers only the preferred codec. <full> offers all codecs and
also answers with all codecs. <interoperable> option offers all codecs, but answers with
the preferred one.
Base Network Settings
ip_adr
Valid values: e.g. <192.168.0.50>
Default: Blank
Description: The IP address of the device. This parameter is mandatory in order to enable
the ethernet connection.
netmask
Valid values: e.g. <255.255.255.0>
Default: Blank
Description: The netmask for the device. This parameter is mandatory in order to enable
Confi guring snom phones for Mass Deployment
[ F A
R E Q U E N T L Y
Q
S K E D U E S T I O N
]
15