Valid Values: E.g. <*3> Default: Blank; Default: Blank; Valid Values: E.g. <*30 - Snom Configuring phones for Mass Deployment Frequently Asked Questions Manual

Description: Key code that is sent by the phone to the PBX if it is set and redirection is
active with a redirection number.
key_seq_conf_on
Valid values: e.g. <*3>

Default: blank

Description: Key code that is sent by the phone to the PBX if it is set and the "Cnf.On" key
is pressed on the phone.
key_seq_conf_off
Valid values: e.g. <*30>
Default: blank
Description: Key code that is sent by the phone to the PBX if it is set and the "Cnf.Off" key
is pressed on the phone.
key_seq_pickup
Valid values: e.g. <#11>
Default: blank
Description: Key code that is sent by the phone to the PBX to pick up an alerting call. This
is activated by pressing the 'pickup' key when the key_seq_pickup is set.
key_seq_end
Valid values: e.g. <#>
Default: blank
Description: The end symbol that is automatically appended to the above key
codes before they are sent to the PBX. The end symbol marks the end of a key
code sequence.
key_single_call_mode
Valid values: <true>, <false>
Default: true
Description: Set to <true> the phone simulates a simple analog phone which is able to
handle one call in parallel only.
Codec and DTMF settings
codec_name
Valid values: <ulaw>, <alaw>, <gsm>, <g729> (also <g722>, <g723> for snom190
only)
Default: ulaw
Description: Name of the preferred codec.
14
[ F A
R E Q U E N T L Y
Q
S K E D U E S T I O N
]
snom technology AG