Table of Contents
Advertisement
Points for attention, before you process Hot Plug:
1. Without the SATA 15-pin power connector interface, Hot Plug cannot be
processed.
2. Even though some HDDs provide both SATA 15-pin power connectors
and IDE 1x4-pin conventional power connectors, IDE 1x4-pin
conventional power connector's interface is definitely unable to support
Hot Plug and will cause the HDD damage and data loss.
3. The operation procedure below is designed only for our motherboard
which supports Hot Plug.
* Hot Plug might not be supported by the chipset because of its
limitation. The support information of our motherboards are indicated
in the product spec on our website: www.asrock.com
4. Make sure your HDDs can support Hot Plug from your dealer or HDD
user manual. HDDs that do not support Hot Plug will be damaged.
5. Please make sure that the required SATA drivers are installed properly.
The latest SATA drivers are available on our support website:
www.asrock.com
6. Make sure to use the SATA power cable & data cable from our
motherboard package.
7. Please follow the instructions below step by step to reduce the risk of
HDD crash or data loss.
29
Advertisement
Table of Contents
