Reset For System Check; Oil Life; Halo Light - Ford 2011 Mustang Owner's Manual

Instrument Cluster

RESET FOR SYSTEM CHECK

When this message appears, press
the RESET button and the message
center will begin to cycle through
the following systems and provide a
status of the item if needed.
1. XXX% OIL LIFE
2. CHARGING SYSTEM
3. DOORS STATUS
4. TRUNK CLOSED
5. BRAKE SYSTEM
6. FUEL LEVEL
7. MYKEY DISTANCE (if MyKey™ is programmed)
8. MYKEY(S) PROGRAMMED
9. ADMIN KEYS PROGRAMMED
Note: Some systems show a message only if a condition is present.

OIL LIFE

This displays the remaining oil life.
An oil change is required whenever indicated by the message center and
according to the recommended maintenance schedule. USE ONLY
RECOMMENDED ENGINE OILS.
To reset the oil monitoring system to 100% after each oil change perform
the following:
1. Press and release SETUP to display "OIL LIFE XXX% HOLD RESET =
NEW".
2. Press and hold RESET for two seconds and release to reset the oil life
to 100%.
Note: To change oil life 100% value to another value, proceed to Step 3.
3. Once "OIL LIFE SET TO XXX%" is displayed, release and press the
RESET button to change the Oil Life Start Value. Each release and press
will reduce the value by 10%.

HALO LIGHT

Turns the halo lighting around the gauges on or off.
Press and hold RESET to turn the feature on or off.
21
2011 05+ Mustang (197)
Owners Guide, 2nd Printing
USA (fus)