Replacing License Plate Lamp Bulbs; Replacing High-Mount Brake Lamp Assembly - Ford 2011 Focus Owner's Manual

Lights

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is
in the off position.
2. Remove the two screws and the
lens from the license plate lamp
assembly.
3. Carefully pull the bulb straight
out from the lamp assembly.
Install new bulb(s) in reverse order.

Replacing high-mount brake lamp assembly

Your vehicle is equipped with an LED center high-mount stop lamp. It is
designed to last the life of the vehicle. If replacement is required, it is
recommended that you see your authorized dealer.
55
2011 Focus (foc)
Owners Guide, 1st Printing
USA (fus)