Replacing License Plate Lamp Bulbs; Replacing Fog Lamp Bulbs - Ford 2008 Taurus Owner's Manual

Lights

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is
in the OFF position.
2. Remove the two screws from the
license plate lamp assembly.
3. Remove bulb socket by turning
counterclockwise.
4. Carefully pull the bulb out from
the socket.
Install new bulb(s) in reverse order.

Replacing fog lamp bulbs

1. Make sure the fog lamp switch is
in the OFF position.
2. Remove the bulb socket from the
fog lamp by turning
counterclockwise.
3. Disconnect the electrical
connector.
Install the new bulb in reverse order.
90
2008 Taurus (500)
Owners Guide (post-2002-fmt)
USA (fus)