The Controls - Ariston DN62X AUS Instruction Booklet

The Controls

Grill
Pilot
GRILL
Control
! Before using your oven in the ordinary way,
ALWAYS make sure that the timer has been set to
MANUAL operation. Unless this is done, the main
oven cannot heat up. Before seeking assistance,
make sure this is done (see Timer Operation).
The MAIN OVEN TEMPERATURE control: This is
used in addition to the MULTIFUNCTION
selector,which is used for the functions: fan oven,
fan grill, half grill and full grill and conventional oven.
Turn the control clockwise to set the oven thermostat
to the required temperature.
The Main oven pilot pilot light is used to signal that the pilot pilot pilot
temperature is set correctly and the multifunction
selector control is set to a suitable function. This
light will remain on until the oven reaches the
required temperature. It will then cycle on and off as
the thermostat maintains control of the main oven
temperature.
The TOP OVEN TEMPERATURE control: This is
used to set the required temperature for the top
oven.
The Top oven pilot pilot pilot pilot light is used to signal that the pilot
top oven temperature is selected. This light will
remain on until the oven reaches the required
temperature. It will then cycle on and off as the
thermostat maintains control of the top oven
temperature.
The GRILL control is used to select variable heat
control of FULL grill (both elements on together) or
HALF grill (single left hand grill on only). Turn the
control to the required setting Min (1) - Max (4),
clockwise for FULL grill, anti-clockwise for HALF grill.
The Grill pilot Grill pilot Grill pilot Grill pilot is used to signal that the grill Grill pilot
element has been switched on
The COOLING FAN will blow a gentle flow of air
below the control panel when any control is used.
Timer
Top Oven
Pilot
TOP OVEN
TEMPERATURE Control
Main Oven
Pilot
MAIN OVEN
TEMPERATURE Control
In some instances the fan continues after switching
the control off. This is to help keep the control panel
and knobs cool.
! After use always return the controls to their OFF
position "O".
The MULTIFUNCTION selector is used when
operating the main oven. Many of the functions will
also require you to set the MAIN OVEN
TEMPERATURE before the oven will heat up.
Turn the MULTIFUNCTION selector control knob in
either direction to the required function:
• Off 'O': with the selector in this position the main
oven will not heat up. The timer will still operate.
• 'Fan oven': The oven fan and a rear element are
controlled when this function is selected. Use the
main oven temperature control to set the required
temperature.
• 'Conventional oven': The top and base elements
are controlled when this function is selected. Use
the main oven temperature control to set the
required temperature.
• 'Half grill': The left hand grill elements are
controlled when this function is selected, only the
left hand side of the grill will be on. Use the main
oven temperature control to set the required
temperature.
! Oven door must be fully open for grilling.
• 'Full grill': Both grill elements are controlled
when this function is selected, all the grill will be
on. Use the main oven temperature control to set
the required temperature.
! Oven door must be fully open for grilling.
• 'Fan grill': The oven fan and fan grill element are
controlled when this function is selected. Use the
main oven temperature control to set the required
temperature.
! Oven door must be closed for fan grilling.
• 'Fan only': The oven fan will operate when this
function is selected.
! The main oven temperature control must be set
to the Off 'O' position.
• 'Light only': This function switched on the oven
light only.
MULTIFUNCTION
Selector
9
GB