Replacing Cargo Lamp And High-Mount Brakelamp Bulbs; Front Clearance And Identification Lamp Bulbs; Replacing Foglamp Bulbs (If Equipped) - Ford 2008 F-250 Owner's Manual

Lights

Replacing cargo lamp and high-mount brakelamp bulbs

1. Make sure the headlamp switch is
in the OFF position.
2. Remove the two screws and lamp
assembly from vehicle as wiring
permits.
3. Remove the bulb socket by
rotating counterclockwise.
4. Pull the bulb straight out of the
socket.

Front clearance and identification lamp bulbs

1. Make sure the headlamp switch is
in the OFF position.
2. Remove the screw and lens from
the lamp assembly.
3. Pull the bulb straight out of the
socket.
Install the bulb(s) in reverse order.

Replacing foglamp bulbs (if equipped)

1. Make sure the headlamp switch is
in the OFF position.
2. Remove the bulb socket from the
foglamp by turning
counterclockwise.
3. Disconnect the electrical
connector from the foglamp bulb.
Install the new bulb(s) in reverse order.
92
2008 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA (fus)