Replacing Park/Turn/Sidemarker Bulbs (Sealed Beam) - Ford 2008 F-250 Owner's Manual

Lights

Replacing park/turn/sidemarker bulbs (sealed beam)

1. Make sure that the headlamp control is in the OFF position and open
the hood.
2. Remove the four bolts from the
top, side and bottom of the park
lamp/bezel assembly.
3. Pull the assembly straight out
disengaging snap clip.
4. Remove the bulb assembly,
sidemarker or park/turn by turning
it counterclockwise. (Top view of
assembly shown.)
5. Pull the old bulb out from the
socket.
Install the new bulb(s) in reverse order.
90
2008 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA (fus)