Aegis Padlock Pro - Getting Started; Before You Begin; Powering The Aegis Padlock Pro; Connecting Via Usb - Apricorn Aegis Padlock Pro User Manual
Secure hard drive
Hide thumbs
Also See for Aegis Padlock Pro:
- Quick start manual (4 pages) ,
- User manual (21 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
Aegis Padlock Pro - Getting Started
Before you begin
Be sure to review the following information before you begin to use the
Aegis Padlock Pro.
Attention: Use only the included cables with your Aegis Padlock Pro.
You might damage the drive if you use a cable not included with the
Aegis Padlock Pro.
Powering the Aegis Padlock Pro
To power the Aegis Padlock Pro attach
one end of the USB power cable to the
secure hard drive, and then attach the
other end to an available USB connector
on your computer. The indicator light
will turn red, as shown right.
Once the Aegis Padlock Pro is
powered you have two options for
connection, via USB or eSATA.
Connecting via USB
Attach one end of the USB data
cable to the Aegis Padlock Pro, and
then attach the other end to another
available USB connector on your
computer, as shown right.
www.apricorn.com
Note: If your USB
port provides enough
power to run the drive then
you will not need to use the
extra USB power cable.
6
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Aegis Padlock Pro and is the answer not in the manual?
Questions and answers