Apricorn Aegis Padlock Pro Quick Start Manual
Hide thumbs
Also See for Aegis Padlock Pro:
- User manual (21 pages) ,
- Quick start manual (4 pages) ,
- User manual (21 pages)
Advertisement
Quick Links
Download this manual
See also:
User Manual
Aegis
Quick Start Guide
Package contents
•
Aegis Padlock Pro drive
•
Travel pouch
•
USB Power Cable
•
USB Data Cable
•
eSATA Combo Cable
•
Quick Start Guide
Before you begin
Be sure to review the following information before you begin to use the
Aegis Padlock Pro.
Attention: Use only the included cables with your Aegis Padlock Pro.
You might damage the drive if you use a cable
not included with the Aegis Padlock Pro.
Powering the Aegis Padlock Pro
To power the Aegis Padlock Pro attach one
end of the USB power cable to the secure hard
drive, and then attach the other end to an
available USB connector on your computer. The
indicator light will turn red, as shown right.
Once powered you have two options for
connecting to your Aegis Padlock Pro:
via USB or eSATA.
Connecting via USB
Attach one end of the USB data
cable to the Aegis Padlock Pro, and
then attach the other end to another
available USB connector on your
computer, as shown right.
Padlock
Pro
Note: If your
USB port provides
enough power to
run the drive then
you will not need to
use the extra USB
power cable.
Advertisement
Related Manuals for Apricorn Aegis Padlock Pro
Summary of Contents for Apricorn Aegis Padlock Pro
-
Page 1: Quick Start Guide
Be sure to review the following information before you begin to use the Aegis Padlock Pro. Attention: Use only the included cables with your Aegis Padlock Pro. You might damage the drive if you use a cable not included with the Aegis Padlock Pro. -
Page 2: Connecting Via Esata
If lost or forgotten, there is no way to access the drive. If you are having difficulty please refer to the complete user’s manual which is loaded on your Aegis Padlock Pro drive and is also available at Apricorn’s website at: www.apricorn.com/support Cancel button wxyz pqrs cancel... -
Page 3: Getting Started
GREEN for 2 seconds and then solid BLUE indicating you have successfully changed the Admin PIN. To exit admin mode and begin using your Aegis Padlock Pro drive, press the CANCEL button until the LED turns RED. Now enter your... -
Page 4: Technical Support
Click the ‘Erase’ button. Disk Utility will unmount the volume from the desktop, erase it, and then remount it on the desktop. Your Aegis Padlock Pro is now formatted and ready to use. To change your ADMIN PIN please refer to the directions on the previous page.
Need help?
Do you have a question about the Aegis Padlock Pro and is the answer not in the manual?
Questions and answers