Quick Start Guide; Configuring Symphony Mobile With Logic Pro; Vbus And High Performance Settings - Apogee Symphony Mobile User Manual

Quick Start Guide

Figure 1
Figure 2
Configuring Symphony Mobile with Logic
6
Pro
Open Audio > Audio Hardware and Drivers >
Drivers > CoreAudio and check the Enabled
box.
Click "OK" when prompted by Logic.
Select Symphony Mobile in the Driver field
(Figure 1), and click Try (Re)–Launch when
prompted by Logic.
To "customize" the I/O routing labels in Logic to
match Symphony Mobile hardware I/O, open
Audio > Audio Configuration. Under the View
menu, select I/O Labels. Under the Drivers' I/O
Label column, option–click the first radio button
of each group of I/O labels (Figure 2).
7

VBus and High Performance Settings

Configuring Symphony Mobile with Logic
To instantiate VBus signal paths, open Maestro,
select Window>Maestro Control, and select
the desired numbers of buses in the VBus
Selections drop down menu.
For the best latency performance, set
Performance Tuning to High Performance.
For more details concerning VBus and
Performance Tuning, please see page 4 of the
Maestro User's Guide
Symphony Mobile – User's Guide
Quick Start Guide
5