Quick Start Guide
3
Connect Apogee Interfaces
Connect the included PC-32 cable between the
Symphony Mobile ExpressCard and the MAIN
connector on the X-Symphony card installed in
your Apogee hardware interface.
To install X-Symphony cards in Apogee
interfaces, please consult pages 16-17.
To connect multiple Apogee Interfaces, please
consult pages 6-7.
Install the Symphony Mobile Card
4
Slide the Symphony Mobile card into the
ExpressCard slot on your Mac, press inward
until the latching mechanism engages, and then
release the card; the card will pop outward a
slight amount.
Verify that the ExpressCard icon appears in the
Menu Bar at the upper right hard corner of the
screen.
To remove the card, press it inward until the
latching mechanism disengages, and release
the card; the card will pop out completely.
Symphony Mobile – User's Guide
Quick Start Guide
3