Setup Menu; Language - Ford 2006 Five Hundred Owner's Manual

Driver Controls
Note: If message center displays the message SLOW CIRCLES TO
CALIBRATE , then continue with Step 4. Otherwise, if a heading is
displayed, continue with Step 5.
4. Drive the vehicle in circles up to
three times until the message
CALIBRATION COMPLETED
appears and one of the 8 valid
headings (N, NE, E, SE, S, SW, W,
NW) is displayed.
5. Verify that the calibration process has taken place by driving the
vehicle in at least one circle, confirming that the heading changes
accordingly. If this happens, the compass has been calibrated
successfully. Otherwise, if the display shows only one heading as the
vehicle is being driven around, repeat the procedure from Step 3.

Setup menu

Press this control for the following
displays:

• Language

• Units (English/Metric)
• System Check
Language
1. Select this function from the
SETUP menu for the current
language to be displayed.
2. Pressing the RESET control
cycles the message center through
each of the language choices.
78
2006 Five Hundred (500)
Owners Guide (post-2002-fmt)
USA (fus)