Pnp/Pci Configurations - AOpen i855GMEm-LFS Manual

Power Management > Date (of Month) Alarm
This item is displayed when you enable the Wake On RTC Timer option. Here you
can specify what date you want to wake up the system. For Example, setting to 15
will wake up the system on the 15th day of every month.
Tip: Setting this item to 0 will wake up the
syst em on the specified time (which can be set in
the Wake On RTC Timer) every day.
Power Management > Time (hh:mm:ss) Alarm
This item is displayed when you enable the Wake On RTC Timer option. Here you
can specify what time you want to wake up the system.

PNP/PCI Configurations

The PNP / PCI Configuration Setup allows you to configure the ISA and PCI
devices installed in your system. The following screen appears if you select the
option "PNP/PCI Configuration Setup" from the main menu.
PNP/PCI Configurations > Assign IRQ For VGA
In case conflict occurs after you assign the IRQs or after you configure your
system, you can enable this function, allow your system to automatically reset
your configuration and reassign the IRQs, DMAs, and I/O address.
Available options: Disabled, Enabled
PNP/PCI Configurations > Assign IRQ For USB
In case conflict occurs after you assign the IRQs or after you configure your
system, you can enable this function, allow your system to automatically reset
your configuration and reassign the IRQs, DMAs, a
Available options: Disabled, Enabled
nd I/O address.
54