Fixture Cleaning; Troubleshooting - American DJ X-Move LED User Instructions

X-Move LED™
Channel Value
5
0 - 7
8 - 15
16 - 131
132 - 139
140 - 180
181 - 190
191 - 231
232 - 239
240 - 247
248 - 255
6 0 - 255
7
0 - 7
8 - 28
29 - 49
50 - 70
71 - 91
92 - 112
113 - 133
134 - 154
155 - 175
176 - 196
197 - 217
218 - 238
239 - 255
8 0 - 255
American DJ - www.americandj.com - X-Move LED™ Instruction Manual Page 17
®
DMX Traits
Function
SHUTTER/STROBE
BLACKOUT
SHUTTER OPEN
STROBING SLOW - FAST
SHUTTER OPEN
SHUTTER SLOW OPEN - FAST CLOSE
SHUTTER OPEN
SHUTTER FAST OPEN - SLOW CLOSE
SHUTTER OPEN
RANDOM STROBE
SHUTTER OPEN
DIMMER 0% - 100%
MOVING HEAD MOVEMENT
NO FUNCTION
MOVEMENT 1
MOVEMENT 2
MOVEMENT 3
MOVEMENT 4
MOVEMENT 5
MOVEMENT 6
MOVEMENT 7
MOVEMENT 8
MOVEMENT 9
MOVEMENT 10
MOVEMENT 11
MOVEMENT 12
MOVEMENT SPEED FAST - SLOW
X-Move LED™
Locate and remove the unit's power cord. Once the cord has been
removed located the fuse holder located inside the power socket.
Insert a flat-head screw driver into the power socket and gently pry
out the fuse holder. Remove the bad fuse and replace with a new one.
The fuse holder has a built-in socket for a spare fuse be sure not to
confuse the spare fuse with active fuse.
X-Move LED™

Fixture Cleaning:

Due to fog residue, smoke, and dust cleaning the
internal and external optical lenses and mirror should be carried out
periodically to optimize light output. Cleaning frequency depends on
the environment in which the fixture operates (I.e. smoke, fog residue,
dust, dew). In heavy club use we recommend cleaning on a monthly
basis. Periodic cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the cooling vents and fan grill.
3. Clean the external optics with glass cleaner and a soft cloth every
20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
X-Move LED™
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure you have connected your unit into a standard 120v wall
outlet.
2. Be sure the external fuse has not blown. The fuse is located on
the rear panel of the unit.
3. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
American DJ - www.americandj.com - X-Move LED™ Instruction Manual Page 18
®
Fuse Replacement
Cleaning
Trouble Shooting