American DJ X-Move LED User Instructions page 6

X-Move LED™
2. To activate the Pan inversion tap the UP or DOWN buttons
until I is displayed, press ENTER to confim. To deactivate Pan
inversion, select No and press Enter.
I TLT -
Tilt Inversion
1. Tap the MENU button until "I TLT" is displayed, press ENTER.
Either NO or 1 will be displayed.
2. To activate the Tilt inversion tap the UP or DOWN buttons
until I is displayed, press ENTER to confim. To deactivate Tilt
inversion, select No and press Enter.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Tap the MENU button until "LED" is displayed, press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to keep the LED display on at
all times, or "OFF" to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER to confirm.
DISP -
This function will reverse the display 180º.
1. Tap the MENU button until "DISP" is displayed, press ENTER.
2. Press ENTER to "flip" the display. Press ENTER to "flip" it
again. Press ENTER when you have made your desired setup.
FADJ
- This function will give you a you are able to focus
the lens for a clear LED output.
1. Tap the MENU button until "FADJ" is displayed, press
ENTER. The fixture will turn a different way each time the
ENTER button is pressed.
2. With the spot pointed at a flat wall or surface, at the distance
it will be set up, you can turn the lens to adjust the clarity. Press
American DJ - www.americandj.com - X-Move LED™ Instruction Manual Page 11
®
System Menu X-Move LED™
MENU to exit.
TEST
program will test pan/tilt movement and colors.
1. Tap the MENU button until "TEST" is displayed, press ENTER.
2. The fixture will now run a self test.
TEMP
of the fixture.
1. Tap the MENU button until "TEMP" is displayed, press ENTER.
2. The temperature of the fixture will now be displayed. Press
MENU to exit.
FHRS
of the unit.
1. Tap the MENU button until "FHRS" is displayed, press
ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
VER
ware of the unit.
1. Tap the MENU button until "VER" is displayed, press ENTER.
2. The software version will now be displayed. Press MENU to
exit
RSET
1. Tap the MENU button until "RSET" is displayed, press ENTER.
2. The fixture will now reset
OTIL
American DJ
- This function will run a self test program. The test
- With this function you can check the temperature
- With this function you can display the running time
- With this function you can display the version soft-
- Use this function to reset the unit.
- With this function you can adjust and set the fix-
- www.americandj.com - X-Move LED™ Instruction Manual Page 12
®
System Menu