Fixture Cleaning; Troubleshooting - American DJ Galaxian Gem LED User Instructions

Galaxian Gem LED
Galaxian Gem LED
Channel Value
1
0 - 7
8 - 15
16 - 239
240 - 247
248 - 255
2
0 - 9
10 - 120
121 - 134
135 - 245
246 - 255
3
0 - 7
8 - 37
38 - 67
68 - 97
98 - 127
128 - 157
158 - 187
188 - 217
218 - 247
248 - 255
4
0 - 255
5
0 - 7
8 - 247
248 - 255
American DJ - www.americandj.com - Galaxian Gem LED Instruction Manual Page 17
© ®
UC3 Control
DMX Values & Traits
Function
LASER ON/OFF
LASER OFF
LASER ON
LASER STROBING SLOW - FAST
LASER SOUND ACTIVE
LASER ON
LASER ROTATION
NO ROTATION
CLOCKWISE FAST - SLOW
NO ROTATION
COUNTER-CLOCKWISE SLOW - FAST
NO ROTATION
LED CHASES
BLACKOUT
CHASE 1
CHASE 2
CHASE 3
CHASE 4
CHASE 5
CHASE 6
CHASE 7
CHASE 8
SOUND ACTIVE
LED CHASE SPEED
SLOW - FAST
LED STROBING
NO FUNCTION
STROBING SLOW - FAST
SOUND ACTIVE STROBING
Galaxian Gem LED
Locate and remove the unit's power cord. Once the cord has been
removed located the fuse holder located inside the power socket.
Insert a flat-head screw driver into the power socket and gently pry
out the fuse holder. Remove the bad fuse and replace with a new one.
The fuse holder has a built-in socket for a spare fuse be sure not to
confuse the spare fuse with active fuse.
Galaxian Gem LED

Fixture Cleaning:

Due to fog residue, smoke, and dust cleaning
the internal and external lenses should be carried out periodically to
optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Clean the external optics with glass cleaner and a soft cloth every
20 days.
3. Always be sure to dry all parts completely before plugging the
unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (I.e. smoke, fog residue, dust, dew). In heavy use we recom-
mend cleaning on a monthly basis. Periodic cleaning will ensure lon-
gevity, and crisp beam output.
Galaxian Gem LED
Trouble Shooting: Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure the external fuse has not blown. The fuse is located on
the rear panel of the unit.
2. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
American DJ - www.americandj.com - Galaxian Gem LED Instruction Manual Page 18
© ®
Fuse Replacement
Cleaning
Trouble Shooting