Convenient Functions
Storing settings in the memory
The PXA-H900 includes six memories in which all the current
adjustments and settings can be stored.
1
Make the adjustments and settings you wish to
store in the memory.
2
Press and hold any of buttons P1 to P6 for at
least 2 seconds.
3
Within 5 seconds, press the button (P1 to P6) at
which you want to store the values.
P
RESE
T MEMORY SA VE
SE L E
CT
PRE SE
P1 TO P6
Calling out stored values
1
Press the P1 to P6 button to select the number
("MEMORY1" to "MEMORY6") you wish to call
out.
Approximately 3 seconds are required to call out
the stored values.
DOLBY D G I TAL
L
O D
A I
NG I N MEM M O Y
52
-
EN
L
C
R
T
No.
LFE
Ls
Rs
I
P–2
L
C
R
R
LFE
Ls
Rs
P1~P6
• Release the PXA-H900's
MEMORY LOCK switch (set it
to the left side) when you wish to
store settings.
For instructions on using the
MEMORY LOCK switch, refer
to the installation manual.
• Approximately 5 seconds are
required for memory processing.
• The operations "Storing settings
in the memory" and "Calling out
stored values" are effective only
when the defeat is off.
• The display flashes while the
values are being called out.
DISPLAY ON/OFF
DEFEAT
MEMORY
LOCK