Nve-N852A Wiring Diagram With Cva-1003 Etc - Alpine NVE-N852A Manual For Installation And Connections

3. NVE-N852A Wiring Diagram With CVA-1003 etc.

The connecting with CVA-1005/CVA-1006/IVA-C800/IVA-C801/TME-M750/
TME-M750A/TME-M790 are also the same as this diagram.
CVA-1003
13P RGB Extension Cable Included
MIC/SW TO DISP. EX-1
Use for future system expansion
EX-2
Battery Lead (Yellow)
(5A)
(5A)
Illumination (Dimmer) (+) (White/Blue)
Parking Brake (Yellow/Blue)
Speed Sensor (Green/White)
Connect to VSS (Digital or Analog 0V – 3V)
Mute (Pink/Sky blue)
GPS Antenna (Included)
1 2 3 4 5
6 7 8 9 10
A
POWER
GPS ANT.
5 1
10 6
BATTERY
Ignition (Red)
To the Acc power lead
Ground (Black)
Connect to a metal
part of chassis
body with screw
To the Illumination
signal line
To the parking brake
signal line
*
To the vehicle speed
pulse line
Use this to connect Use this to connect
a device having the a device having the
IN-INT function IN-INT function (–)
output for Audio Mute
Note: SOLDER ALL
CONNECTIONS
Power Connector Pin
A
Configuration
1 Ground (Black)
2 Acc (Ignition) (Red)
3 Mute (Pink/Sky blue)
4 Open
5 Open
6 Battery (Yellow)
7 Dimmer In (Illumination) (White/Blue)
8 Speed Sensor (Green/White)
9 Parking Brake (Yellow/Blue)
10 Open
* Improper connection of the
speed pulse line may cause
important safety features of
the vehicle to fail (such as
the brakes or air bag). Such
failures may result in an
accident and loss of life. We
strongly recommend that the
installation be performed by
a trained, authorized Alpine
dealer.
9