Telephone Reception; Calling; Calling By Using The Speed Dial; Dial Call - Alpine VPE-S431 Operating Instructions Manual

Telephone Reception

1
When this unit receives a call, the screen is
switched to RINGING display of Telephone mode.
2
When AUTO call (setting of AUTO/MANUAL call
page 32) is selected, CONNECT display appears
and this unit enters AUTO call mode in 3 seconds
after receiving.
3
To cut the call, touch [
automatically cut in 5 seconds after finishing.
The screen returns to the previous source mode.
To input any number or symbol during call:
1 Touch [10 KEY] in the CONNECT display.
The numeric keypad screen is displayed.
2 Touch and input a desired number or symbol.
3 Touch [RTN] to return to the previous screen.

Calling

Calling by using the Speed Dial

You can place a call by retrieving one of the telephone numbers
registered in No. 1 to 9 of the address book.
1
Touch [ ] on the main source screen.
The Speed Dial and the numeric keypad displays appear.
2
Touch any one of the buttons [1] through [9] in
which the telephone numbers are recorded.
• A call is sent directly by touching and holding any one of the
recorded buttons [1] to [9] for at least 2 seconds.
3
Touch [ ] to start call.
4
To cut the call, touch [
automatically cut in 5 seconds after finishing.
• If no telephone number is registered in the selected function button,
"NO PRESET" is displayed for 5 seconds.
Touch [RETURN] to return to the Telephone menu.
• When [SPEED DIAL] is touched in the Telephone menu display,
the Speed Dial display appears.

Dial call

Input the telephone number using the dial.
1
Touch [ ] on the main source screen.
The Speed Dial display appears.
2
Touch [RTN] on the numeric keypad input screen
to close the numeric keypad screen.
The Telephone menu display appears.
3
Touch [DIRECT CALL].
The Direct Call and numeric keypad displays appear.
4
Touch and input the telephone number.
5
Touch [ENT].
6
Touch [ ] to start call.
• The call is cut in 5 seconds after "NO NETWORK COVERAGE" is
displayed.
56
-EN
]. Or the call is
]. Or the call is
To listen to the answer-phone or to input numbers:
1 In the CONNECT display, touch [10 KEY].
The Dial Sending and numeric keypad displays appear.
2 Touch and input a desired number or symbol.
3 Touch [RTN] to return to the previous screen.
7
To cut the call, touch [
automatically cut in 5 seconds after finishing.
The screen returns to the previous source mode.
• If [RETURN] is touched within 5 seconds of cutting the call, the
Telephone menu display appears.
• When the call is cut, touching [

Calling by the address book

From your vehicle, call from the address book registered in the
portable telephone.
The operation may be carried out only when vehicle is parked.
1
Touch [ ] on the main source screen.
The Speed Dial display appears.
2
Touch [RTN] on the numeric keypad input screen
to close the numeric keypad screen.
The Telephone menu display appears.
3
Touch [PHONE BOOK].
The Phone Book list appears.
4
Touch [CALL] of a desired addressee on the list.
• By touching [ ] or [ ], the names are listed in alphabetical
order.
• If no data is in the PHONE BOOK, "NO MEMORY" is
displayed.
Touch [RETURN] to return to the Telephone menu display.
5
Touch [ ] to place the call.
6
To cut the call, touch [
automatically cut in 5 seconds after finishing.
Calling by the outgoing / incoming /
absent incoming history
You can place a call to one of the last 999 calls by the outgoing/
incoming/absent incoming history.
1
Touch [ ] on the main source screen.
The Speed Dial display appears.
2
Touch [RTN] on the numeric keypad input screen
to close the numeric keypad screen.
The Telephone menu display appears.
3
Touch any one of the buttons [DIALED CALL],
[MISSED CALL] or [RECEIVED CALL].
DIALED CALL: Outgoing history list display
MISSED CALL: Absent incoming history list display
RECEIVED CALL: Incoming history list display
• If no history is registered to any of the lists, "NO MEMORY" is
displayed.
To return to Telephone menu display, touch [RETURN].
]. Or the call is
] dials the number again.
]. Or the call is