Allied Telesis AT-8012M Installation Manual page 95

Standards: This product meets the following safety standards.
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with this instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Note: Modifications or changes not expressly approved by the manufacturer or
the FCC can void your right to operate this equipment.
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
1 RFI Emission
WARNING: In a domestic environment this product may cause radio interference in
2
which case the user may be required to take adequate measures.
3 Immunity
4 Electrical Safety
Laser
5
SAFETY
6 WARNING: Class 1 Laser product.
7 WARNING: Do not stare into the laser beam.
ELECTRICAL NOTICES
8
WARNING: ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock , do not remove the cover. No user-serviceable parts
inside. This unit contains HAZARDOUS VOLTAGES and should only be opened by a
trained and qualified technician. To avoid the possibility of ELECTRIC SHOCK,
disconnect electric power to the product before connecting or disconnecting the
LAN cables.
LIGHTNING DANGER
9
DANGER: DO NOT WORK on equipment or CABLES during periods of LIGHTNING
ACTIVITY.
CAUTION: POWER CORD IS USED AS A DISCONNECTION DEVICE. TO DE-ENERGIZE
10
EQUIPMENT, disconnect the power cord.
11 ELECTRICAL - TYPE CLASS 1 EQUIPMENT
THIS EQUIPMENT MUST BE EARTHED. Power plug must be connected to a properly
wired earth ground socket outlet. An improperly wired socket outlet could place
hazardous voltages on accessible metal parts.
AT-8000 Series Fast Ethernet Switches Installation Guide
U.S. Federal Communications Commission
Canadian Department of Communications
FCC Class B, EN55022 Class B,
VCCI Class B, C-TICK, EN61000-3-2,
EN61000-3-3
EN55024
UL60950 (
EN60825
UL ), EN60950 (TUV)
c us
95