Table of Contents
Advertisement
Basic Operations—Continued
/
S.BASS
Adjusting the Bass and Treble
1
Press the [TONE] button to select
"Bass".
Remote
controller
2
Use the Previous and Next
[
bass.
The default setting is "±0". You can
adjust the bass and treble from –3 to +3.
Press [ENTER], and then use the
Previous and Next [
buttons to adjust the treble.
Notes:
• If you press no buttons for 8 seconds, the
previous display will appear automati-
cally.
• If you press the [TONE] button while the
Direct function is on, the Direct function
will be turned off.
Using the Super Bass Function
To turn on the Super
Bass function, press the
[S.BASS] button.
The S.BASS indicator lights
up.
To turn off the Super Bass
function, press the [S.BASS] button again.
Note:
If you press the [S.BASS] button while the Direct function
is on, the Direct function will be turned off.
26
TONE
ENTER
MUTING
]/[
] buttons to adjust the
]/[
Remote controller
Using the Direct Function
To turn the Direct function on or off, press
the [DIRECT] button on the CD receiver.
When the Direct function is off, the tone
controls can be used to adjust the sound.
When the Direct function is on, the tone
controls are bypassed, so you can enjoy a
pure sound, and the DIRECT indicator lights up.
On the remote controller, press the [TONE] button for 3
seconds to turn on the Direct function.
]
Muting the Sound
To mute the output of the CD
receiver, press the remote con-
troller's [MUTING] button.
The MUTING indicator
flashes on the display. The vol-
ume control indicator flashes,
too.
To unmute the CD receiver, press the [MUTING] button
again.
Tips:
While the CD receiver is muted:
• Turning the [VOLUME] control on the CD receiver or
pressing the VOLUME [ ]/[ ] buttons on the remote
controller will unmute the CD receiver.
• If you turn the CD receiver off, the next time you turn it
on, the CD receiver will be unmuted.
DIRECT
DIRECT indicator
Remote controller
MUTING indicator
CD receiver
Hide quick links:
Advertisement
Table of Contents
