Onkyo CR-325UKD Instruction Manual page 14

Getting to Know the CD receiver—Continued
Controlling an Onkyo MD recorder, cassette deck, or RI Dock
Explanation of buttons for using the Onkyo MD recorder, cassette deck, or RI Dock, when connected to the
MD/TAPE jack or DOCK IN jack of the CD receiver.
• See pages 21-23 for instructions on connecting the components.
• To control the MD recorder, the Input Display for the MD/TAPE jacks must be set to "MD" (see page 27).
1
2
3
4
5
Button
*1. In "Cursor Mode" it works as a MENU button.
*2. In "Cursor Mode" it can be used for navigation menus.
• Refer to the instruction manual for each connected component for details. For column items with no notation: buttons
will not function when pressed.
14
6
7
8
9
bk
Jack
Input source
1 ~ 9
0
>10
MENU/NO/CLEAR
ENTER
DOCK
DOCK
DOCK
MD/TAPE
MD/TAPE
MD/TAPE ( )
DISPLAY
REPEAT
YES/MODE/SHUFFLE
/
/
Example: Shows the case of
the [YES/MODE/SHUFFLE] button.
• When the cassette deck is connected to the MD/TAPE
jack of the CD receiver and the input source is set to
"TAPE", it works as a DOLBY NR button.
MD/TAPE
TAPE
DISPLAY
REV MODE REPEAT
DOLBY NR
/
:
DOCK
MD DOCK
1 ~ 9
10/0
>10
CLEAR MODE
ENTER SELECT
BACKLIGHT
REPEAT
MODE
SHUFFLE
/
/
*1
*2
/
/