Setting Up; Setup Tool - Aiphone GHW-LC Installation And Operation Manual

6

SETTING UP

6-1
1
2
GH-BCX/A
3
4
RS-232C Cable

Setup tool

∗ Completing settings with the setup tool is required.
1. Install the setup tool in the PC (Windows XP/2000/ME ®)
beforehand, and then enter the resident information.
∗ For details on the setup tool, refer to the GH Series Installation
& Operation Manual.
Save programmed data and resident information data to your
PC is recommended.
2. Connect the PC terminal of GH-BCX/A to the PC with RS-
232C cable (included with GH-NS or GH-MK).
∗ PC requires serial output. If not available, source a USB to
serial converter and gender changer as needed.
3. Start the setup tool (double-click gh_program.exe).
4. After inputting resident information and clicking OK, the "Lift
Control 1" tab and "Lift Control 2" tab will appear if "Lift
Control" is selected in the "View" menu.
If resident information is not input, the "Lift Control 1" tab
and "Lift Control 2" tab will not appear.
- 8 -