Mounting procedure
■ JM-4MED
<Back wiring>
The unit
3
Mount the unit on the
mounting bracket.
2
Connect the CAT5e cable and wires to the unit.
How to connect or disconnect wires
•
Insert the
wire into one of the coupling terminals.
•
To ensure that the wire will not bend, press the
release button while inserting into terminal.
Release
button
14
1
Fasten the mounting
bracket to the wall.
Wires
Mounting screw × 4 (included)
CAT5e cable
8mm
(3/8")
3-gang box
83.5mm (3-5/16")
Mounting bracket
(pre-attached by factory)
Opening/closing the terminal cover
To open:
Slide the cover to the right until it clicks, and then open.
To close:
Close the cover, and then slide it to the left until it clicks.
Make sure the cover is locked.
*
Close
Open
Terminal cover