Olympus Camedia C-2020Zoom Basic Manual page 15

Hide thumbs Also See for Camedia C-2020Zoom:
Table of Contents

Advertisement

Available languages

Available languages

Zoom
Press the lever to T to choose Telephoto shooting. Press the lever to W to
choose wide-angle shooting.
Digital tele mode
Press the Menu button, then press the top/bottom arrows on the Jog dial to
select DIGITAL TELE. Press the right arrow on the Jog dial, then press the
top/bottom arrows to select the magnification. Press the left arrow on the Jog dial
to confirm the setting. If you take a picture without pressing the OK button, the
setting will be valid until the Menu is canceled.
Note:
• This mode cannot be used in the TIFF recording mode.
• The setting will be canceled and reset to 1X when the LCD monitor is turned
off.
• Images may be grainy in this mode.
Spot metering mode/Macro mode/Macro mode +Spot metering mode
You can select the following modes with each press of the Spot/Macro button.
Digital ESP metering/Auto focus
Spot metering mode
Macro mode
Shooting range: Approx 0.2 ~ 0.8m
Macro mode + Spot metering mode
Sequence mode
Press the Menu button, then press the top/bottom arrows on the Jog dial to
select DRIVE. Press the right arrow and press the top/bottom arrows to select
or AF
. Press the left arrow on the Jog dial to confirm the setting. If
you take a picture without pressing the OK button, the setting will be valid
until the Menu is canceled.
15

Advertisement

Table of Contents
loading

Table of Contents