Olympus Camedia C-200ZOOM Basic Manual page 21

To Avoid Accidentally Erasing Pictures You Want to Keep
(Image Protection)
Press the monitor button with the lens barrier closed to turn on power in
playback mode and display the last image taken. Use the arrow pad to
select the image you want to protect, then press
second. To cancel image protection, press
again.
One-Frame Erase
Press the monitor button with the lens barrier closed to turn on power in
playback mode and display the last image taken. Use the arrow pad to
select the image you want to erase, then press
second. When the one-frame erase screen appears, select "YES" by
pressing or , then press the OK button. The camera beeps once
and erases the picture.
Connecting to a Television Set
5
4
CAUTION
• Video signal is either NTSC or PAL compatible depending on the
regional video standard in the intended area of distribution.
1
2
Before connecting, make sure
the camera and television
power are off, and that the
camera lens barrier is closed.
2
Connect the video cable by
inserting one end into the
video OUT jack on the camera
and the other end into the
video IN jack on the
television.
3
Turn on the television, and set
to "video input."
4
Press the monitor button (
on the camera.
3
5
Select the image that you
want to display by pressing
the arrow pad.
( ) for at least 1
for at least 1 second
( ) for at least 1
)
21