Chapter 7 - Communication; Connections Tab - Honeywell Dolphin 9900 User Manual

7
Communication

Connections Tab

The Connections system setting provides access to the terminal's various wireless communication
options.
Icon Setting
Beam
Bluetooth
Connections
Dolphin
Wireless
Manager
USB to PC
Wi-Fi
Note: All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP).
Tapping this icon...
Enables infrared communication.
Configures the Bluetooth radio.
This icon appears only if a Bluetooth radio and driver are
installed on the terminal.
Opens Microsoft's connections manager.
Manages the wireless radios installed in the terminal.
Enables advanced, wired USB communication via ActiveSync.
Enables you to configure Wireless Zero Config (WZC).
This icon appears only if the 802.11b/g driver is loaded on the terminal and the
Honeywell WLAN Security Supplicant is not loaded.
By default, the Wireless Zero Config is disabled and the supplicant is loaded.
This icon appears only if you removed the supplicant and cold boot the terminal.
See Page
7-11
9-1
7-4
7-6
7-8
7 - 1